1. Inspect: Check the body, wheel arches, and undercarriage for signs of rust.
2. Clean: Remove loose rust with a wire brush or sandpaper.
3. Treat: Apply a rust converter to neutralize rust.
4. Prime and Paint: Use a primer and touch-up paint to protect the area.
5. Seal: Consider using a rust-proofing sealant for added protection.

For detailed procedures and preventative measures, consult our manual.

1. Check Fuses: Inspect and replace any blown fuses.
2. Test Battery: Ensure the battery is fully charged and connections are clean.
3. Inspect Wiring: Look for damaged or loose wires.
4. Examine Components: Check alternator and starter for proper function.
5. Consult Wiring Diagrams: Use our manual's diagrams to trace electrical circuits.

Our manual provides comprehensive diagnostics and repair tips.

1. Inspect Carburetor: Look for leaks and blockages.
2. Clean: Disassemble and clean the carburetor using a carb cleaner.
3. Adjust: Tune the idle speed and mixture settings.
4. Replace Parts: Change worn-out gaskets and seals.
5. Test: Ensure the engine runs smoothly after adjustments.

Refer to our manual for detailed carburetor maintenance and troubleshooting.

1. Inspect: Examine shocks, struts, and bushings for wear or damage.
2. Replace Components: Swap out worn shocks, struts, or bushings.
3. Align Wheels: Perform a wheel alignment to ensure proper handling.
4. Check for Leaks: Inspect for fluid leaks from shock absorbers.

Our manual includes detailed suspension repair procedures and tips.

1. Inspect System: Check radiator, hoses, and connections for leaks.
2. Pressure Test: Use a cooling system pressure tester to locate leaks.
3. Repair or Replace: Fix leaks with sealant or replace damaged parts.
4. Refill Coolant: Top off with the correct coolant mixture.
5. Monitor: Regularly check for leaks and coolant levels.

Find detailed instructions and troubleshooting in our manual.