1. Check Spark Plugs: Remove and inspect spark plugs for wear or damage. Replace if necessary.
2. Inspect Ignition Coils: Test ignition coils for proper function using a multimeter. Replace faulty coils.
3. Examine Fuel Injectors: Clean or replace fuel injectors if they are clogged or malfunctioning.
4. Verify Fuel Pressure: Ensure fuel pressure is within specifications. Adjust or replace the fuel pump if needed.

For more detailed troubleshooting, refer to our 1995 Hyundai Avante 1.5 GLS manual for step-by-step instructions.

1. Inspect for Noise: Listen for any unusual noises coming from the engine, such as squeaking or ticking.
2. Check Timing Belt Condition: Remove the timing belt cover and inspect for signs of wear, cracking, or stretching.
3. Replace Timing Belt: If the belt is damaged or has reached its replacement interval (usually every 60,000-100,000 miles), replace it according to the manufacturer’s specifications.
4. Verify Tension: Ensure the timing belt is properly tensioned and aligned.

Refer to our manual for specific timing belt replacement procedures and maintenance schedules.

1. Check Fuses and Relays: Inspect and replace any blown fuses or faulty relays.
2. Inspect Wiring: Examine wiring for any visible damage or corrosion.
3. Test Electrical Components: Use a multimeter to check the functionality of electrical components such as the alternator and battery.
4. Repair Connections: Clean and secure any loose or corroded electrical connections.

Our service manual provides detailed wiring diagrams and troubleshooting steps for specific electrical issues.

1. Inspect for Rust: Regularly check for rust on the body and undercarriage.
2. Clean Affected Areas: Remove rust using a wire brush and sandpaper.
3. Apply Rust Inhibitor: Apply a rust-inhibiting primer and paint to protect the metal.
4. Seal Vulnerable Areas: Use rust-proofing products on susceptible areas to prevent future corrosion.

Our manual includes maintenance tips and protective measures to keep your vehicle rust-free.

1. Locate the Leak: Inspect the radiator, hoses, and water pump for leaks.
2. Check Coolant Level: Ensure the coolant level is adequate. Refill if necessary.
3. Replace Damaged Parts: Replace any damaged hoses, radiator, or water pump components.
4. Test System Pressure: Use a cooling system pressure tester to identify and fix leaks.

Our repair manual provides detailed instructions on cooling system repairs and leak prevention.