• Inspect Air Intake System: Ensure the throttle body and intake manifold are clean.
• Check Fuel Delivery: Test fuel pump pressure and inspect injectors for clogs.
• Scan for Error Codes: Use an OBD-II scanner to detect potential sensor malfunctions.
• Clean or Replace Sensors: Focus on the Mass Air Flow (MAF) sensor or oxygen sensors.

Detailed troubleshooting for stalling issues is provided in the manual.

• Inspect Idle Air Control Valve: Check for dirt or malfunction.
• Check for Vacuum Leaks: Look for cracks in hoses or fittings.
• Test Electrical Connections: Ensure stable power to sensors and actuators.

The manual outlines step-by-step procedures to resolve idling problems.

• Check Spark Plugs: Inspect for wear or incorrect gaps.
• Test Ignition Coils: Replace faulty coils.
• Inspect Fuel System: Look for clogged injectors or low fuel pressure.

For misfire-specific repairs, consult the manual for diagrams and instructions.

• Inspect Cooling System: Check radiator, hoses, and coolant levels.
• Test Thermostat: Replace if not opening or closing properly.
• Check Water Pump: Ensure it circulates coolant effectively.

The manual provides complete guidance for cooling system diagnostics and repairs.

• Check Clutch Fluid: Ensure levels are adequate and free from air.
• Inspect Linkage: Look for alignment issues or wear in the shift cables.
• Test Synchros: Replace damaged synchronizers if necessary.

Transmission repair instructions and detailed illustrations are included in the manual.