1. Identify the Symptoms: Look for signs of vibration or noise, especially when accelerating or decelerating.
2. Lift the Vehicle: Safely lift the vehicle using a hydraulic jack and secure it with jack stands. Ensure the car is on a level surface.
3. Locate the Tail Shaft: Find the tail shaft beneath the vehicle and examine the center bearing for wear or damage.
4. Remove the Tail Shaft: Loosen the bolts connecting the tail shaft to the transmission and differential. Carefully remove the tail shaft from the vehicle.
5. Replace the Center Bearing: Slide the old bearing off and replace it with a new one. Ensure it fits securely and aligns properly with the shaft.
6. Reinstall the Tail Shaft: Reattach the tail shaft to the vehicle, tightening the bolts to the manufacturer's specifications.
7. Test Drive: Lower the vehicle and take it for a test drive to ensure the vibrations have been resolved.

For detailed diagrams and torque specifications, consult our Ford Falcon XR6 Turbo Workshop Service & Repair Manual. This manual provides comprehensive instructions for replacing the tail shaft center bearing and maintaining your vehicle's drivetrain.

1. Listen for Noises: Pay attention to any knocking or clunking sounds from the rear, especially when going over bumps or during acceleration.
2. Inspect the Diff Bushes: Lift the vehicle and inspect the differential bushes for signs of wear, such as cracks or significant movement.
3. Remove the Rear Wheels: Take off the rear wheels for better access to the differential and the bushings.
4. Support the Differential: Use a jack or support to hold the differential in place while you work on removing the bushes.
5. Remove the Old Bushes: Use a bushing removal tool to press out the old, worn bushes. Take care to avoid damaging surrounding components.
6. Install New Bushes: Insert the new bushes into place, ensuring they are aligned and seated correctly.
7. Reassemble and Test: Reinstall the rear wheels, lower the vehicle, and take it for a drive to check if the knocking noise has disappeared.

Our Ford Falcon XR6 Turbo Service Manual provides step-by-step guidance and illustrations to help you replace worn diff bushes with ease, ensuring your Falcon's handling remains precise and smooth.

1. Diagnose the Problem: Set your climate control to a specific temperature and observe if the air temperature matches the setting.
2. Access the Heater Box: Remove the dashboard panels to reach the heater box and mix door components.
3. Inspect the Mix Door Actuator: Check the actuator for any electrical or mechanical faults. If faulty, it may need replacement.
4. Check for Obstructions: Examine the mix door for any obstructions or jamming. Manually move the door to ensure it functions freely.
5. Replace the Actuator: If the actuator is defective, replace it with a new one, following the manufacturer's installation instructions.
6. Test the Heater: Reassemble the dashboard and test the heating system to verify that the mix door is operating correctly and that the cabin temperature is as expected.

Our detailed Workshop Service & Repair Manual for the Ford Falcon XR6 Turbo includes comprehensive guides on diagnosing and repairing HVAC issues, ensuring you can maintain a comfortable cabin environment.

1. Identify the Smell: If you notice a sweet, syrupy smell inside the cabin, it likely indicates a coolant leak.
2. Check for Dampness: Look for signs of dampness or wet spots on the passenger-side floor mat, which may suggest a leaking heater core.
3. Inspect Heater Core Connections: Access the heater core connections under the dashboard and inspect for leaks or loose fittings.
4. Examine Coolant Lines: Check the coolant lines leading to the heater core for cracks or damage.
5. Replace the Heater Core (if needed): If the heater core is leaking, it may require replacement. This involves draining the coolant, disconnecting the heater core, and installing a new one.
6. Seal Leaks: Use a sealant to fix minor leaks if replacing the heater core is unnecessary.
7. Refill Coolant: After repairs, refill the coolant system and check for any further leaks.

For detailed instructions on accessing and repairing the heater core, refer to our Ford Falcon XR6 Turbo Repair Manual. It provides you with all the information needed to tackle HVAC issues effectively and keep your cabin fresh and odor-free.

1. Understand the Warning: The red triangle warning light usually signals a severe issue like engine overheating, low oil pressure, or brake system problems.
2. Check the Owner’s Manual: Refer to your vehicle's manual to identify the specific cause of the warning light.
3. Check for Other Warnings: Look for accompanying warning lights or messages to pinpoint the problem more accurately.
4. Seek Professional Assistance: If the warning persists or you cannot identify the issue, consult a professional mechanic or service center immediately.

Our Ford Falcon XR6 Turbo Service Manual is invaluable for diagnosing dashboard warnings and performing essential checks, helping you address these issues before they escalate.