2014 Hyundai Elantra GT automatic – Workshop Service & Repair Manual

1. Check Engine Warning Lights: Look for any warning lights on your dashboard. A check engine light can indicate a serious problem.
2. Inspect for Oil Leaks: Ensure that there are no visible oil leaks under your vehicle. Low oil levels can cause engine failure.
3. Listen for Unusual Noises: Pay attention to any knocking or unusual engine noises, which can be a sign of internal damage.
4. Scan for Error Codes: Use an OBD-II scanner to check for diagnostic trouble codes (DTCs) that may point to the root cause of the failure.
5. Consult a Professional: If the issue persists, it may require a professional mechanic to diagnose and repair. Engine replacements can be costly, so early intervention is key.

Our service manual provides detailed instructions for diagnosing and addressing engine issues, helping you avoid costly repairs.

1. Check Oil Level Regularly: Monitor your oil levels frequently, especially if you notice consumption increasing.
2. Inspect for Leaks: Look for oil leaks around the engine and under the vehicle.
3. Check for Smoke: Blue smoke from the exhaust can indicate oil burning inside the engine.
4. Examine PCV Valve: A faulty Positive Crankcase Ventilation (PCV) valve can cause excessive oil consumption. Replace if necessary.
5. Use the Correct Oil: Make sure you're using the recommended oil type and viscosity for your vehicle.

Our manual provides guidance on checking and replacing components like the PCV valve, which can help reduce oil consumption.

1. Check Transmission Fluid Level: Ensure the transmission fluid is at the correct level. Low fluid can cause slipping.
2. Inspect Fluid Condition: Transmission fluid should be clean and red. Dark or burnt-smelling fluid indicates it needs to be changed.
3. Examine the Transmission Pan: Look for metal shavings or debris in the transmission pan, which could signal internal damage.
4. Test the Transmission in Various Gears: Try shifting through all gears to see if slipping occurs in specific ones.
5. Consider Professional Help: If slipping persists, a professional diagnosis is necessary as it could be a sign of internal transmission wear.

With our detailed transmission repair manual, you can learn how to check and maintain your transmission to prevent slipping

1. Check Transmission Fluid: Ensure the fluid level is adequate and the condition is good.
2. Inspect Transmission Mounts: Worn mounts can cause alignment issues, leading to hard shifting.
3. Update Transmission Software: Some hard shifting issues can be resolved with a software update from the dealership.
4. Check Shift Linkages: Ensure that the shift linkages are properly adjusted and lubricated.
5. Consult a Mechanic: If the problem persists, it might be due to internal transmission problems that require professional repair.

Our service manual can guide you through inspecting and adjusting the components that commonly cause hard shifting.

1. Check Transmission Fluid Level: Low fluid can cause delayed engagement.
2. Inspect for Fluid Leaks: Look under the vehicle for signs of transmission fluid leaks.
3. Examine the Transmission Filter: A clogged filter can restrict fluid flow, leading to delays.
4. Warm Up the Engine: Cold weather can thicken transmission fluid, leading to delayed engagement until the car warms up.
5. Seek Professional Diagnosis: Persistent delayed engagement may require internal transmission inspection and repair.

Our detailed manual offers step-by-step instructions on how to troubleshoot and resolve transmission issues like delayed engagement.