2004 Ford Focus C-Max 1.8 16V Ghia – Workshop Service & Repair Manual

To resolve problems with the electronic parking brake, follow these steps:

1. Inspect the Fuse: Check the fuse for the parking brake system and replace it if it's blown.
2. Check Wiring Connections: Ensure all wiring connections to the electronic parking brake module are secure and undamaged.
3. Reset the System: Disconnect the battery for about 10 minutes to reset the electronic parking brake system.
4. Recalibrate the Brake: Use a diagnostic tool to recalibrate the electronic parking brake if needed.

Our manual provides detailed guidance on troubleshooting and fixing electronic parking brake issues.

To fix an overheating wiper motor, follow these steps:

1. Inspect Wiper Blades: Ensure the wiper blades are in good condition and not causing excessive strain.
2. Clear Obstructions: Check for any debris or obstructions in the wiper mechanism that could be causing overheating.
3. Clean the Mechanism: Remove any dirt or debris from the wiper linkage and motor.
4. Test the Motor: If overheating continues, the wiper motor may need to be replaced.

Our manual offers step-by-step instructions for diagnosing and addressing wiper motor overheating.

To address engine misfires, especially in the 1.8 petrol engine, follow these steps:

1. Replace Spark Plugs: Check and replace worn or damaged spark plugs.
2. Inspect Ignition Coils: Test and replace faulty ignition coils if necessary.
3. Clean or Replace Fuel Injectors: Ensure that the fuel injectors are clean and functioning correctly.
4. Check for Vacuum Leaks: Inspect the intake system for any vacuum leaks that might be causing misfires.

Our manual provides detailed procedures for diagnosing and fixing engine misfires.

To address engine misfires, especially in the 1.8 petrol engine, follow these steps:

1. Replace Spark Plugs: Check and replace worn or damaged spark plugs.
2. Inspect Ignition Coils: Test and replace faulty ignition coils if necessary.
3. Clean or Replace Fuel Injectors: Ensure that the fuel injectors are clean and functioning correctly.
4. Check for Vacuum Leaks: Inspect the intake system for any vacuum leaks that might be causing misfires.

Our manual provides detailed procedures for diagnosing and fixing engine misfires.

To address turbocharger issues, follow these steps:

1. Check for Oil Leaks: Inspect the turbocharger and surrounding areas for any signs of oil leaks.
2. Examine the Turbocharger: Look for signs of physical damage or excessive wear on the turbocharger.
3. Replace the Air Filter: Ensure the air filter is clean and not obstructing airflow to the turbocharger.
4. Inspect Boost Hoses: Check for and replace any damaged or leaking boost hoses.

Our manual provides thorough guidance for diagnosing and repairing turbocharger problems.