2008 Ford C-Max 1.6 TDCi (110) Style DPF – Workshop Service & Repair Manual

1. Inspect Turbocharger: Check for visible damage or leaks in the turbocharger and its connections.
2. Check for Error Codes: Use a diagnostic tool to identify turbocharger-related codes.
3. Clean or Replace: If the turbocharger is dirty, clean it thoroughly. Replace it if you find significant damage.
4. Test Performance: After cleaning or replacement, run a performance test to ensure proper operation.

For detailed turbocharger repair instructions, refer to our Workshop Service & Repair Manual.

1. Check Battery Voltage: Measure battery voltage to confirm if the alternator is not charging properly.
2. Inspect the Alternator Belt: Ensure the belt driving the alternator is not worn out or loose.
3. Run Diagnostic Tests: Use a diagnostic tool to verify alternator performance.
4. Replace the Alternator: Follow the manual’s guidelines for safely removing and replacing the alternator.

Our manual provides step-by-step guidance for diagnosing and replacing faulty alternators.

1. Read Error Codes: Use a diagnostic scanner to retrieve error codes associated with limp-home mode.
2. Inspect Critical Components: Check the turbocharger, fuel system, and sensors for faults.
3. Reset and Test: Clear the error codes and perform a test drive to see if limp-home mode reactivates.
4. Consult a Professional: If issues persist, consult a professional mechanic for further diagnosis.

Detailed limp-home mode troubleshooting is covered in our manual.

1. Check Fuses and Relays: Inspect and replace any blown fuses or faulty relays.
2. Inspect Wiring: Look for loose or damaged wiring connections in the affected areas.
3. Test Electrical Components: Use a multimeter to check the functionality of switches and motors.
4. Consult the Manual: Follow our manual’s detailed electrical troubleshooting steps for further guidance.

Our manual includes extensive information on resolving electrical faults.

1. Check Coolant Levels: Ensure that the coolant reservoir is at the correct level and top up if necessary.
2. Inspect Radiator and Hoses: Look for leaks or blockages in the radiator and hoses.
3. Test the Thermostat: Verify that the thermostat is opening and closing correctly.
4. Check for Coolant Leaks: Examine the engine for any signs of coolant leakage.

For in-depth engine cooling system maintenance, refer to our manual.