2009 Ford C-Max 1.6 Ambiente – Workshop Service & Repair Manual

1. Inspect for Leaks: Check the oil pan, valve covers, and seals for leaks and repair as needed.
2. Replace the PCV Valve: A clogged PCV valve can lead to increased oil consumption. Replace it if it's not functioning properly.
3. Verify Oil Filter: Ensure the oil filter is clean and properly installed.
4. Conduct a Compression Test: This test can reveal if worn piston rings or cylinder walls are causing excessive oil consumption.
5. Use the Recommended Oil: Ensure you are using the correct oil grade and change it regularly.

For a complete guide on managing high oil consumption, refer to our manual here.

1. Check Coolant Levels: Ensure the coolant is at the proper level and add more if necessary.
2. Look for Leaks: Inspect the radiator, hoses, and water pump for leaks and fix any issues.
3. Replace the Thermostat: A malfunctioning thermostat may need replacing.
4. Test the Radiator Fan: Make sure the fan works when the engine reaches high temperatures.
5. Flush the Cooling System: If the system is clogged, a flush and refill may be necessary.

Detailed instructions for resolving engine temperature issues are available in our manual here.

1. Check for Vacuum Leaks: Inspect all vacuum hoses and connections for leaks.
2. Clean the Throttle Body: A dirty throttle body can cause idle problems. Clean it thoroughly.
3. Replace the Idle Air Control Valve: If it's faulty, it can lead to idle instability.
4. Examine Engine Mounts: Worn engine mounts can affect idle stability. Replace them if needed.

For detailed steps on correcting idle issues, consult our manual here.

1. Inspect Battery and Connections: Ensure the battery is charged and connections are secure and clean.
2. Check Fuses and Relays: Replace any blown fuses or faulty relays.
3. Test Electrical Components: Use a multimeter to check components like the alternator and starter.
4. Examine Wiring: Look for damaged or frayed wiring that could be causing electrical issues.

Our manual provides thorough troubleshooting guidance for electrical issues.

1. Inspect Suspension Components: Check shock absorbers, struts, and springs for damage.
2. Examine Bushings and Joints: Replace any worn bushings or ball joints.
3. Check Alignment: Ensure proper alignment to prevent uneven tire wear and handling issues.
4. Listen for Noises: Any unusual noises while driving may indicate suspension problems.

For a complete guide on fixing suspension issues, refer to our manual here.