2009 Ford C-Max 2.0 TDCi (136) Titanium Styling-Pkg. – Workshop Service & Repair Manual

1. Identify Symptoms: Check for reduced power, excessive exhaust smoke, or unusual noises from the turbo.
2. Inspect Turbocharger: Examine for signs of damage or wear. Ensure the turbocharger is not clogged or leaking.
3. Check Oil Supply: Verify that the turbocharger oil lines are clear and that the oil is at the correct level.
4. Replace Parts: If needed, replace the turbocharger or damaged components.

Consult Manual: Refer to our manual for detailed instructions on turbocharger replacement and troubleshooting.

1. Check Oil Level and Condition: Ensure the oil level is correct and the oil is not dirty or sludgy.
2. Perform an Oil Change: Replace old oil and filter with high-quality oil.
3. Clean Oil Passages: Use a professional engine cleaner to remove sludge from oil passages.
4. Inspect for Blockages: Check the oil pump and filter for any blockages.

Refer to Manual: Our manual provides detailed steps for cleaning and maintaining the oil system.

1. Monitor DPF Warning Light: If the DPF light is on, check for clogging or malfunction.
2. Perform Regeneration: Follow the manual’s instructions for performing a forced regeneration of the DPF.
3. Inspect for Blockages: Check for blockages in the DPF and exhaust system.
4. Replace DPF if Necessary: If cleaning doesn’t resolve the issue, you might need to replace the DPF.

Consult Manual: Our manual offers specific procedures for DPF maintenance and troubleshooting.

1. Check for Error Codes: Use an OBD-II scanner to read any stored error codes.
2. Inspect Sensors and Connections: Look for loose or damaged sensors and wiring.
3. Reset the ECU: Sometimes, a reset of the ECU can clear temporary faults.
4. Address Faults: Follow the diagnostic steps in the manual to fix any issues indicated by error codes.

Refer to Manual: Detailed diagnostic and repair procedures are available in our manual.

1. Identify the Source: Determine whether the squeaks come from the dashboard, seats, or other areas.
2. Tighten Loose Components: Check and tighten any loose parts or fittings inside the cabin.
3. Apply Lubrication: Use appropriate lubricants on moving parts or hinges.
4. Inspect for Wear: Look for worn or damaged components that might need replacing.

Consult Manual: Our manual includes detailed steps for addressing and fixing cabin noises.