2010 Ford C-Max 2.0 Style – Workshop Service & Repair Manual

1. Inspect the weather strip to identify where it's loose or detached.
2. Clean the area where the weather strip attaches using a mild detergent and a cloth.
3. Apply a strong adhesive or double-sided tape to the back of the weather strip.
4. Press the strip firmly into place and hold for a few minutes to ensure it adheres properly.
5. Allow the adhesive to cure as per the manufacturer’s instructions before closing the door.

Our manual provides detailed steps and illustrations for proper reattachment and any additional adjustments you may need.

1. Check the transmission fluid level and top up if necessary.
2. Identify the source of the leak—common areas include the transmission seals and drain plug.
3. Replace any faulty seals or gaskets if they are the cause of the leak.
4. Tighten the drain plug or bolts to ensure there are no loose connections.
5. Test drive the vehicle to ensure the leak has been resolved.

Refer to our manual for specific instructions on replacing seals and checking for leaks.

1. Locate the coolant pump and check for any visible leaks or damage.
2. Drain the coolant from the system.
3. Remove the coolant pump by unscrewing the bolts or fasteners.
4. Replace the faulty pump with a new one, ensuring all gaskets are correctly positioned.
5. Refill the cooling system with fresh coolant and check for leaks.

Our manual offers detailed diagrams and step-by-step instructions for replacing the coolant pump and ensuring a proper seal.

1. Verify that the key fob’s battery is not dead; replace it if necessary.
2. Check the keyless entry system’s fuse and replace it if it’s blown.
3. Reprogram the key fob by following the reprogramming procedure outlined in the manual.
4. Inspect the receiver unit for any visible damage or disconnections.
5. Test the system to ensure it functions properly.

Our manual includes a section on troubleshooting electronic systems and keyless entry, which will guide you through the reprogramming and repair process.

1. Check for any warning lights or error codes related to the turbocharger.
2. Inspect the turbocharger for any visible signs of damage or wear.
3. Ensure there are no blockages in the intake or exhaust systems.
4. Clean or replace the turbocharger if necessary, following the manufacturer’s specifications.
5. Recheck the system to ensure proper function and address any error codes.

Our manual provides detailed troubleshooting and repair instructions for turbocharger issues, helping you diagnose and fix problems effectively.