2010 Ford C-Max 2.0 TDCi (110) Style DPF PowerShift (d-cl. 6) – Workshop Service & Repair Manual

1. Identify Symptoms: Look for reduced power, unusual noises, or excessive exhaust smoke.
2. Inspect Turbocharger: Check for visible damage or leaks around the turbocharger.
3. Verify Oil Supply: Ensure that the turbocharger is receiving adequate lubrication by checking the oil levels.
4. Replace Turbocharger: Use the manual's step-by-step guide to safely remove and replace the faulty turbocharger.
5. Test the Vehicle: After installation, test drive the vehicle to ensure the turbocharger is functioning correctly and there are no leaks.

How Our Manual Helps: Our manual provides detailed diagnostic procedures and replacement steps for a faulty turbocharger, ensuring a successful and efficient repair.

1. Locate the Leak: Inspect the coolant pump and surrounding areas for signs of leakage.
2. Drain Coolant: Safely drain the coolant from the system to prevent spills during repair.
3. Remove the Faulty Pump: Follow the manual’s instructions to carefully remove the leaking coolant pump.
4. Install a New Pump: Install a new pump, ensuring all seals are correctly positioned to prevent further leaks.
5. Refill and Bleed the System: Refill the coolant and bleed the system to remove any trapped air.

How Our Manual Helps: Our manual provides comprehensive instructions for diagnosing and repairing coolant pump leaks, helping you effectively address and resolve the issue.

1. Inspect Intake Valves: Look for carbon deposits affecting engine performance.
2. Clean the Valves: Use a recommended cleaning solution as outlined in the manual to remove carbon buildup from the intake valves.
3. Reassemble and Test: Reassemble the intake system and test the engine to ensure improved performance and removal of deposits.

How Our Manual Helps: Our manual includes specific cleaning techniques and maintenance tips to effectively manage and prevent carbon buildup, enhancing engine efficiency.

1. Diagnose the Issue: Determine if the problem is with the window motor, wiring, or switches.
2. Inspect Components: Check for damaged wiring or malfunctioning switches.
3. Test Electrical Parts: Use the manual’s troubleshooting guide to test and diagnose the window motor and related components.
4. Replace Faulty Parts: Replace any defective parts or fuses as recommended in the manual.

How Our Manual Helps: Our manual offers detailed electrical diagrams and troubleshooting steps to help you diagnose and fix common electrical issues effectively.

1. Check Fluid Levels: Ensure transmission fluid levels are adequate as low fluid can cause slipping. Refer to the manual for checking and topping up fluid.
2. Inspect for Leaks: Look for signs of transmission fluid leaks around the transmission area.
3. Replace Transmission Filter: Follow the manual’s guide to replace a clogged transmission filter.
4. Adjust Transmission Settings: Use the manual’s instructions to adjust settings for smoother shifting.
5. Test Drive: After making repairs, test drive to confirm that the transmission shifts smoothly and slipping issues are resolved.

How Our Manual Helps: Our manual provides thorough instructions for diagnosing and fixing transmission problems, including slipping and rough shifting, ensuring your vehicle operates smoothly.