2010 Ford C-Max 2.0 TDCi (140) Titanium – Workshop Service & Repair Manual

A loose door frame weather strip can lead to water leaks and increased road noise.

1. Inspect the Weather Strip: Check the entire length of the weather strip for signs of looseness or damage.
2. Clean the Area: Remove any dirt or debris from the door frame and the weather strip using a clean cloth.
3. Reattach the Strip: Apply adhesive designed for automotive weather strips or use double-sided tape if necessary. Ensure it aligns properly with the door frame.
4. Test for Proper Seal: Close the door and check for any gaps. Adjust as needed.

Our manual provides detailed instructions on how to address this issue and other common problems.

 A leaking manual transmission can lead to loss of transmission fluid and potential damage.

1. Locate the Leak: Check the transmission housing and seals for signs of leakage.
2. Tighten Seals and Bolts: If the leak is minor, tightening the seals and bolts may stop the leak.
3. Replace Faulty Seals: If tightening doesn’t work, replace the faulty seals or gaskets.
4. Refill Transmission Fluid: Add the correct type and amount of transmission fluid as specified in the manual.

For detailed steps on fixing transmission leaks, our manual offers comprehensive guidance.

A coolant pump leak can lead to engine overheating and potential damage.

1. Check Coolant Levels: Verify that the coolant level is low, indicating a leak.
2. Inspect the Coolant Pump: Look for signs of coolant leakage around the pump.
3. Replace the Coolant Pump: If the pump is leaking, replace it with a new one. Ensure the new pump is properly installed and sealed.
4. Replenish Coolant: Fill the cooling system with the correct type of coolant.

Our manual provides step-by-step instructions for replacing a coolant pump and other critical repairs.

 A malfunctioning keyless entry system can be frustrating and inconvenient.

1. Check the Battery: Replace the battery in your key fob and test the system again.
2. Inspect the Receiver: Ensure that the receiver module inside the vehicle is functioning properly.
3. Reprogram the Key Fob: Follow the reprogramming instructions provided in the manual if the key fob needs to be reset.
4. Check Wiring and Connections: Inspect the wiring and connections to the keyless entry system for any damage or loose connections.

Our manual includes detailed troubleshooting for keyless entry system issues.

Random electrical issues, like errant electric window mechanisms or clocks needing resetting, can be complex.

1. Check Fuses: Inspect and replace any blown fuses related to the electrical systems.
2. Inspect Wiring: Look for damaged or loose wiring connections.
3. Reset Electrical Systems: Follow the reset procedures for affected systems as described in the manual.
4. Consult Diagnostic Tools: Use an OBD-II scanner to identify specific error codes if problems persist.

For in-depth troubleshooting and repair solutions, our manual is an invaluable resource.