1975 Ford Capri II 1600 L (low compr.) automatic – Workshop Service & Repair Manual

1. Identify Affected Areas: Check the undercarriage, wheel arches, and body panels for rust.
2. Clean the Rust: Use a wire brush and sandpaper to remove loose rust.
3. Apply Rust Converter: Treat the rusted areas with a rust converter to neutralize the rust.
4. Prime and Paint: Apply a primer designed for metal surfaces followed by a matching paint to protect the area.

For detailed instructions and preventive measures, refer to our repair manual.

1. Check Fuses and Relays: Inspect the fuse box and relays for any blown fuses or faulty relays.
2. Test Wiring Connections: Ensure all electrical connections are secure and free from corrosion.
3. Diagnose Battery and Alternator: Use a multimeter to test the battery voltage and alternator output.
4. Consult Wiring Diagrams: Refer to the manual’s electrical diagrams to trace and repair faulty wiring.

Our manual includes detailed electrical troubleshooting steps and diagrams to help resolve these issues.

1. Inspect Carburetor: Check for any signs of clogging or leaks in the carburetor.
2. Clean the Carburetor: Disassemble and clean the carburetor using a carburetor cleaner.
3. Adjust Fuel Mixture: Adjust the air-fuel mixture to ensure optimal performance.
4. Replace Filters: Ensure fuel filters are clean and replace them if necessary.

Access our comprehensive guide on carburetor maintenance and adjustment in the repair manual.

1. Check Coolant Levels: Ensure the coolant level is adequate and top up if necessary.
2. Inspect Hoses and Connections: Look for leaks or damage in hoses and radiator connections.
3. Test the Thermostat: Check if the thermostat is functioning correctly by testing its response to temperature changes.
4. Flush the Radiator: Perform a coolant flush to remove debris and sediment from the cooling system.

Our manual provides step-by-step instructions for diagnosing and repairing cooling system issues.

1. Check Coolant: Ensure the coolant is at the proper level and in good condition.
2. Inspect Radiator and Fan: Make sure the radiator and cooling fan are working properly.
3. Examine the Water Pump: Check for leaks or issues with the water pump.
4. Test for Engine Blockage: Ensure there are no blockages in the cooling passages of the engine.

For a thorough approach to resolving overheating problems, refer to the detailed procedures in our repair manual.