1976 Ford Capri II 3000 GT automatic – Workshop Service & Repair Manual

1. Inspection: Thoroughly inspect the affected areas for rust damage.
2. Cleaning: Remove any loose rust using a wire brush or sandpaper.
3. Treatment: Apply a rust converter to the affected areas to neutralize rust.
4. Repair: Use body filler to patch any holes or significant damage.
5. Repaint: Apply primer and paint to prevent further rusting.

Our manual provides detailed instructions on rust repair and preventive measures to keep your vehicle’s bodywork in top condition.

1. Locate the Leak: Identify if the leak is coming from the water pump.
2. Drain Coolant: Drain the coolant from the system to avoid spills.
3. Remove the Water Pump: Unbolt and remove the old water pump.
4. Replace the Gasket: Install a new gasket to ensure a proper seal.
5. Install New Pump: Position and bolt the new water pump in place.
6. Refill Coolant: Refill the cooling system with fresh coolant.

The manual includes step-by-step guidance for replacing the water pump and sealing leaks effectively.

1. Diagnose the Issue: Check for symptoms like engine noise or poor performance.
2. Remove Timing Gear Cover: Unbolt and remove the timing gear cover.
3. Inspect Gears: Check for wear or damage on the timing gears.
4. Replace Timing Gear: Install new timing gears if necessary.
5. Reassemble: Reattach the timing gear cover and ensure all bolts are secure.

Our manual provides detailed procedures for diagnosing and replacing timing gears, helping you ensure accurate engine timing.

1. Check for Symptoms: Look for rough idling, poor acceleration, or fuel leaks.
2. Clean the Carburetor: Disassemble and clean the carburetor components using carb cleaner.
3. Adjust Settings: Ensure the idle speed and mixture settings are correct.
4. Replace Parts: Install new gaskets or components if they are worn or damaged.
5. Reassemble and Test: Put the carburetor back together and test the engine.

The manual offers a comprehensive guide to troubleshooting and repairing carburetor issues, ensuring smooth engine performance.

1. Check Coolant Levels: Ensure the coolant level is adequate and top up if necessary.
2. Inspect the Radiator: Look for blockages or leaks in the radiator.
3. Test the Thermostat: Replace the thermostat if it's stuck or malfunctioning.
4. Check the Water Pump: Ensure the water pump is functioning correctly.
5. Examine Cooling Fans: Verify that the cooling fans are operating as expected.

Our manual includes troubleshooting tips and repair procedures for common overheating problems, helping you keep your engine cool and running efficiently.