1978 Ford Capri II 1600 GL – 2nd Gen (II) – Workshop Service & Repair Manual

1. Identify the Rust: Inspect the fenders and rockers for visible rust spots.
2. Clean the Area: Use a wire brush to remove loose rust and debris.
3. Apply Rust Converter: Treat the affected areas with a rust converter to stop further rusting.
4. Prime and Paint: Apply primer to the cleaned area, followed by matching paint to restore appearance.

For detailed steps and additional tips, refer to our comprehensive manual. It provides in-depth instructions to handle rust problems effectively.

1. Check the Battery: Ensure the battery is fully charged and connections are secure.
2. Inspect Fuses: Replace any blown fuses in the fuse box.
3. Examine Wiring: Look for frayed or disconnected wires.
4. Test Electrical Components: Use a multimeter to check for faults in components like the alternator and starter.

Our manual includes detailed troubleshooting guides for electrical issues. Get your copy to resolve these problems efficiently.

1. Check for Leaks: Inspect the carburetor for any fuel leaks.
2. Clean the Carburetor: Remove and clean the carburetor using a carburetor cleaner.
3. Adjust the Mixture: Fine-tune the air-fuel mixture screws as specified in the manual.
4. Replace Parts: If cleaning doesn’t resolve the issue, replace worn or damaged components.

For a step-by-step guide and precise adjustments, consult our detailed manual. It will help you restore optimal carburetor performance.

1. Locate the Leak: Identify the source of the leak by inspecting the transmission and surrounding areas.
2. Check Seals and Gaskets: Replace any worn or damaged seals and gaskets.
3. Refill Transmission Fluid: Top up with the correct type of transmission fluid.
4. Test for Leaks: After repairs, run the vehicle and check if the leak persists.

Our manual provides detailed instructions on addressing transmission issues. Obtain your copy to ensure proper handling of transmission leaks.

1. Check Coolant Levels: Ensure the coolant level is adequate.
2. Inspect Hoses and Radiator: Look for leaks or damage in hoses and the radiator.
3. Flush the System: Perform a coolant flush if the system is clogged.
4. Check the Thermostat: Replace the thermostat if it’s malfunctioning.

For comprehensive cooling system maintenance and repair instructions, refer to our manual. It includes essential information to keep your cooling system running smoothly.