1978 Ford Capri II 2000 L automatic – Workshop Service & Repair Manual

1. Inspect the vehicle for rust, especially in common areas like wheel arches, underbody, and around the windows.
2. Clean the affected areas with a wire brush to remove loose rust.
3. Apply a rust converter to neutralize any remaining rust.
4. Fill any holes or deep rust spots with a suitable filler.
5. Sand the area smooth and repaint with rust-resistant paint.
6. Regularly check and maintain your vehicle to prevent future rust.

Our manual provides detailed steps and tips for rust prevention and repair to keep your Capri looking great.

1. Check all fuses and replace any that are blown.
2. Inspect wiring connections for signs of damage or corrosion.
3. Use a multimeter to test for continuity and voltage in the electrical circuits.
4. Repair or replace faulty components such as switches, relays, or wiring as needed.
5. Ensure the battery terminals are clean and securely connected.
6. Consult the manual for detailed wiring diagrams and troubleshooting procedures.

Find comprehensive electrical troubleshooting and repair instructions in our manual to resolve issues effectively.

1. Inspect the carburetor for signs of leaks or wear.
2. Clean the carburetor using a carburetor cleaner to remove any dirt or debris.
3. Check and adjust the idle speed and mixture settings according to the manufacturer's specifications.
4. Replace any worn or damaged gaskets or seals.
5. Test drive the vehicle to ensure the carburetor is functioning correctly.

Our manual offers a step-by-step guide for carburetor maintenance and adjustment to keep your engine running smoothly.

1. Inspect the suspension components, including shocks, struts, and bushings, for signs of wear or damage.
2. Replace worn or damaged parts with new components.
3. Check for proper alignment and adjust as needed to prevent uneven tire wear.
4. Test drive the vehicle to ensure the suspension is functioning correctly and providing a smooth ride.

Detailed suspension maintenance and repair procedures are included in our manual to help you address wear issues.

1. Identify the source of the oil leak by inspecting the engine and transmission areas.
2. Clean the area around the leak to remove old oil and debris.
3. Replace any worn or damaged gaskets, seals, or oil pan bolts.
4. Tighten any loose bolts or fittings.
5. Refill the engine with the correct type and amount of oil.
6. Check for any further leaks after running the engine.

Our manual includes step-by-step instructions for diagnosing and repairing oil leaks to keep your engine in top condition.