1978 Ford Capri II 2000 S – Workshop Service & Repair Manual

1. Inspect for Rust: Check common rust spots like the wheel arches, undercarriage, and around the doors.
2. Remove Rust: Use a wire brush or grinder to clean off rust. For severe rust, consider using a rust remover chemical.
3. Apply Rust Converter: Treat the area with a rust converter to neutralize remaining rust.
4. Prime and Paint: Apply primer followed by matching paint to protect the area from future rust.
5. Seal: Use a rust-proof sealant to provide additional protection.

For detailed instructions and preventative maintenance tips, refer to our comprehensive repair manual for the 1978 Ford Capri II 2000 S.

1. Check Fuses: Inspect and replace any blown fuses in the fuse box.
2. Test Battery: Ensure the battery is fully charged and terminals are clean.
3. Inspect Wiring: Look for damaged or loose wiring connections. Repair or replace as necessary.
4. Examine Alternator: Test the alternator to ensure it is charging the battery properly.
5. Use a Multimeter: Measure voltage at various points to diagnose electrical issues.

Our manual provides detailed electrical diagrams and troubleshooting steps. Download it for a thorough guide on resolving electrical issues.

1. Inspect Carburetor: Check for fuel leaks and ensure the carburetor is clean.
2. Clean Carburetor: Disassemble and clean the carburetor with a carb cleaner. Remove any debris or clogs.
3. Adjust Idle Speed: Set the idle speed and air-fuel mixture according to specifications.
4. Replace Gaskets: If necessary, replace worn or damaged gaskets to prevent leaks.
5. Reassemble and Test: Put the carburetor back together and test the vehicle for smooth operation.

Our manual offers step-by-step carburetor servicing instructions. Access it to ensure proper maintenance and repair.

1. Locate the Leak: Inspect the radiator, hoses, and connections for leaks.
2. Check Coolant Level: Refill the coolant and monitor for any drops in level.
3. Repair or Replace Parts: Fix or replace any leaking hoses, clamps, or the radiator itself.
4. Pressure Test: Use a cooling system pressure tester to identify leaks that are not immediately visible.
5. Flush System: Flush the cooling system to remove debris and ensure proper function.

For comprehensive guidance on cooling system repairs, consult our detailed manual for the 1978 Ford Capri II 2000 S.

1. Check Fluid Levels: Ensure transmission fluid is at the correct level and top up if necessary.
2. Inspect for Leaks: Look for leaks around the transmission and repair any damaged seals or gaskets.
3. Test Shifting: Observe if the transmission is shifting smoothly. If not, it may need adjustment or repair.
4. Change Fluid and Filter: Replace old transmission fluid and filter to improve performance.
5. Consult a Professional: For complex issues, seek advice from a transmission specialist.

Download our detailed manual for in-depth instructions on transmission maintenance and repairs.