1978 Ford Capri 1.6 L – Workshop Service & Repair Manual

1. Inspect the Vehicle: Check for rust spots, particularly around the wheel arches, sills, and undercarriage.
2. Clean the Area: Remove loose rust and dirt with a wire brush or sandpaper.
3. Apply Rust Converter: Use a rust converter to neutralize any remaining rust.
4. Paint and Seal: Apply primer and paint to protect the area from future rust.
5. Regular Maintenance: Keep the car clean and waxed to prevent rust formation.

For detailed instructions and diagrams, our manuals offer comprehensive guidance.

1. Check Fuses: Inspect the fuse box for any blown fuses and replace them if necessary.
2. Inspect Wiring: Look for frayed or damaged wires and connectors.
3. Test Battery and Alternator: Ensure the battery is fully charged and the alternator is functioning properly.
4. Verify Ground Connections: Check all ground connections for corrosion or looseness.
5. Consult the Wiring Diagram: Use the wiring diagram from our manual to identify and fix electrical issues.

Our manuals include detailed wiring diagrams and troubleshooting steps to help you resolve electrical problems efficiently.

1. Check Fuel Filter: Replace the fuel filter if it’s clogged or dirty.
2. Inspect Fuel Lines: Look for leaks or damage in the fuel lines.
3. Clean the Carburetor: Remove and clean the carburetor to ensure proper fuel flow.
4. Check Fuel Pump: Test the fuel pump for proper pressure and operation.
5. Examine Fuel Injectors: Clean or replace fuel injectors if they are clogged.

Our manuals provide step-by-step procedures for diagnosing and fixing fuel system issues.

1. Inspect Components: Check for worn-out bushings, shocks, and struts.
2. Replace Worn Parts: Replace any damaged or worn suspension components.
3. Check Alignment: Ensure the wheel alignment is correct to prevent uneven tire wear.
4. Test Handling: Drive the vehicle to check for unusual noises or handling issues.
5. Consult a Professional: If unsure, have a professional inspect and repair the suspension.

Our manuals include maintenance tips and detailed procedures for suspension repairs and replacements.

1. Check Coolant Level: Ensure the coolant level is adequate and top up if necessary.
2. Inspect Radiator: Check for leaks or blockages in the radiator.
3. Test Thermostat: Replace the thermostat if it’s not regulating temperature correctly.
4. Inspect Water Pump: Ensure the water pump is functioning and not leaking.
5. Flush Cooling System: Flush and replace the coolant if it’s old or contaminated.

Our manuals offer detailed instructions on maintaining and troubleshooting engine cooling systems to help prevent overheating.