1978 Ford Capri 2.0 V6 GL – Workshop Service & Repair Manual

1. Inspect the vehicle for rust spots, particularly around the wheel arches, underbody, and door frames.
2. Sand down the affected areas to remove loose rust.
3. Apply a rust-inhibiting primer to the cleaned areas.
4. Paint with a matching color to prevent further corrosion.
5. Regularly wash and wax the car to protect against future rust.

For a comprehensive guide on rust treatment and prevention, refer to our detailed manual for step-by-step instructions and maintenance tips.

1. Check the battery and alternator connections for corrosion or loose terminals.
2. Inspect fuses and replace any that are blown.
3. Test electrical components like lights, indicators, and wipers for proper function.
4. Use a multimeter to diagnose voltage issues.
5. Consult the wiring diagrams in the manual to trace and fix wiring problems.

Our manual provides detailed electrical diagrams and troubleshooting steps to help you resolve electrical issues efficiently.

1. Inspect the fuel lines for leaks or damage.
2. Replace the fuel filter if it's clogged.
3. Clean or replace the carburetor if it's not delivering fuel properly.
4. Ensure the fuel pump is functioning and replace it if necessary.
5. Check the fuel tank for sediment or rust and clean it if needed.

Our manual offers comprehensive coverage of fuel system maintenance and repairs to guide you through each step.

1. Checking the transmission fluid level and topping up if necessary.
2. Inspecting for leaks around the transmission.
3. Testing the transmission for smooth shifting and adjusting the linkage if needed.
4. Performing a transmission fluid flush if it’s dirty or burnt.
5. Consult the manual for detailed repair procedures or consider a professional service if problems persist.

Find detailed instructions and maintenance tips for your transmission in our workshop manual.

1. Check the coolant level and top up with the correct type of coolant.
2. Inspect the radiator for blockages and clean or replace it if necessary.
3. Test the thermostat and replace it if it’s faulty.
4. Ensure the water pump is working properly and replace it if it's leaking or not functioning.
5. Examine the cooling fans and ensure they operate correctly.

For a thorough guide on diagnosing and repairing engine overheating issues, refer to our detailed manual.