1978 Ford Capri 2.3 V6 S automatic – Workshop Service & Repair Manual

1. Inspect the vehicle for rust spots, particularly in areas prone to moisture like the wheel arches and undercarriage.
2. Clean the affected areas thoroughly using a wire brush to remove loose rust.
3. Apply a rust converter to the cleaned surfaces to neutralize the remaining rust.
4. Repaint the treated areas with rust-resistant primer and topcoat.
5. Regularly inspect and touch up any new rust spots to prevent further damage.

Our manual provides detailed instructions and maintenance tips to help you manage and prevent rust issues effectively.

1. Check the battery to ensure it is fully charged and the terminals are clean and secure.
2. Inspect the fuses and replace any that are blown.
3. Test the alternator to make sure it’s charging properly.
4. Examine wiring and connections for any signs of wear or loose connections.
5. Consult a professional if the issue persists, as it might require specialized diagnostics.

Our manual offers comprehensive electrical system diagrams and troubleshooting steps to assist with electrical faults.

1. Check the fuel filter and replace it if it’s clogged.
2. Inspect the fuel pump for proper operation and listen for any unusual noises.
3. Examine fuel lines for leaks or cracks and replace damaged sections.
4. Clean the carburetor or fuel injectors to ensure proper fuel delivery.
5. Ensure proper fuel pressure and consult the manual for specific pressure settings.

Our manual provides detailed procedures for maintaining and repairing the fuel system to ensure optimal performance.

1. Inspect the suspension components such as shocks, struts, and bushings for signs of wear.
2. Check the alignment and adjust if necessary.
3. Replace worn parts like bushings, shocks, or struts as needed.
4. Ensure proper tire pressure and inspect tires for uneven wear.
5. Perform regular maintenance checks to avoid excessive wear.

Our manual includes maintenance schedules and replacement instructions to help you manage suspension wear effectively.

1. Check the coolant level and top it up if necessary.
2. Inspect the radiator for blockages and clean it if needed.
3. Verify that the thermostat is functioning correctly and replace it if faulty.
4. Ensure the radiator fan is operating properly.
5. Examine the water pump and hoses for leaks or damage.

Our manual provides step-by-step procedures for diagnosing and resolving engine overheating issues.