1978 Ford Capri 3.0 Ghia – Workshop Service & Repair Manual

1. Inspection: Begin by thoroughly inspecting the vehicle for visible rust spots, particularly in common areas such as the wheel arches, underbody, and around the doors.
2. Preparation: Clean the rusted areas with a wire brush or sandpaper to remove loose rust and paint.
3. Treatment: Apply a rust remover or rust converter to the affected areas. Allow it to dry as per the product instructions.
4. Repair: Use body filler to patch any significant rust holes, then sand it smooth.
5. Painting: Apply a rust-inhibiting primer followed by the appropriate touch-up paint to match your vehicle's original color.
6. Prevention: Regularly wash and wax your vehicle to protect against future rust.

Our manuals provide detailed steps for rust repair and prevention specific to the 1978 Ford Capri 3.0 Ghia, ensuring you have all the information you need for effective maintenance.

1. Diagnosis: Check the fuse box for any blown fuses and replace them as necessary.
2. Inspection: Inspect wiring connections and connectors for any signs of wear, corrosion, or loose connections.
3. Testing: Use a multimeter to test for voltage and continuity in the affected circuits.
4. Repair: Replace faulty wiring or connectors. For persistent issues, consult the wiring diagrams in the manual.
5. Professional Help: If problems persist, consider seeking professional assistance to diagnose and repair complex electrical faults.

Our manuals include comprehensive electrical diagrams and troubleshooting tips for the 1978 Ford Capri 3.0 Ghia, helping you resolve electrical issues efficiently.

1. Inspection: Check the fuel lines and connections for leaks or cracks.
2. Filter Replacement: Replace the fuel filter if it’s clogged or hasn’t been changed recently.
3. Pump Check: Ensure the fuel pump is operating correctly. Listen for unusual noises and check fuel pressure.
4. Carburetor Maintenance: Clean or rebuild the carburetor if it’s dirty or malfunctioning.
5. Test Drive: After repairs, test drive the vehicle to ensure it runs smoothly and addresses the initial issue.

Our manuals provide detailed instructions for diagnosing and repairing fuel system issues, including step-by-step guides for components specific to your model.

1. Coolant Check: Ensure the coolant level is adequate and top up if necessary.
2. Thermostat Inspection: Check if the thermostat is working properly. Replace it if it’s stuck closed.
3. Radiator Check: Inspect the radiator for blockages or leaks and clean or repair it as needed.
4. Hoses and Belts: Check all hoses and belts for wear or damage and replace them if necessary.
5. Coolant Flush: Perform a coolant flush to remove any debris or buildup that might be causing overheating.

Our manuals offer comprehensive cooling system maintenance tips and troubleshooting steps to help you keep your engine running at optimal temperatures.

1. Fluid Check: Inspect the transmission fluid level and condition. Add or replace fluid as needed.
2. Leaks: Check for any signs of transmission fluid leaks around the transmission and under the vehicle.
3. Shifting Issues: If the vehicle is having trouble shifting gears, ensure that the linkage is properly adjusted.
4. Diagnostic: Use a transmission diagnostic tool to check for error codes and identify issues.
5. Professional Service: For complex transmission issues, consider seeking professional assistance for a thorough diagnosis and repair.

Our manuals provide in-depth guidance on transmission maintenance and repairs, helping you address issues efficiently and keep your vehicle running smoothly.