1979 Ford Capri GT 4 – Workshop Service & Repair Manual

1. Inspect the Affected Areas: Regularly check for signs of rust on body panels and the undercarriage.
2. Clean and Remove Rust: Use a wire brush or sandpaper to remove surface rust. For severe cases, a rust remover or chemical treatment might be needed.
3. Apply a Rust Inhibitor: After cleaning, apply a rust-inhibiting primer.
4. Repaint: Finish with a rust-resistant paint.
5. Protect: Consider undercoating your vehicle to protect against future rust.

For detailed instructions and tips, our manual provides comprehensive guidance on rust prevention and repair.

1. Check Fuses and Relays: Inspect and replace any blown fuses or faulty relays.
2. Inspect Wiring: Look for damaged or frayed wires and connections.
3. Test Electrical Components: Use a multimeter to check for electrical continuity and proper voltage.
4. Repair or Replace Faulty Parts: Fix or replace damaged components as needed.
5. Consult Wiring Diagrams: Our manual includes wiring diagrams that help troubleshoot and repair electrical faults.

Our manual offers step-by-step solutions and wiring diagrams for resolving electrical issues effectively.

1. Inspect Carburetor: Check for dirt or debris and clean if necessary.
2. Adjust Fuel Mixture: Ensure the air-fuel mixture is set correctly.
3. Replace Fuel Filters: Change clogged fuel filters to improve fuel flow.
4. Check Fuel Lines: Inspect for leaks or blockages in the fuel lines.
5. Consult Carburetor Settings: Follow the manual for detailed carburetor adjustment procedures.

Our manual provides detailed carburetor adjustments and fueling system maintenance instructions.

1. Check Coolant Levels: Ensure the coolant is at the proper level and top up if necessary.
2. Inspect Radiator and Hoses: Look for leaks or blockages in the radiator and hoses.
3. Test Thermostat: Replace a faulty thermostat that may be causing overheating.
4. Flush Cooling System: Perform a coolant flush to remove any debris or buildup.
5. Check Water Pump: Ensure the water pump is functioning correctly.

Our manual provides a comprehensive guide on cooling system maintenance and troubleshooting overheating issues.

1. Inspect Brake Pads and Rotors: Check for wear and replace worn brake pads or damaged rotors.
2. Check Brake Fluid Levels: Ensure the brake fluid is at the recommended level.
3. Bleed Brakes: Remove air from the brake lines by bleeding the brakes.
4. Inspect Brake Lines: Look for leaks or damage in the brake lines.
5. Consult Maintenance Guidelines: Follow the manual for specific brake system maintenance procedures.

Our manual includes detailed instructions for brake system inspection, maintenance, and repair to ensure your brakes are in top condition.