1970 Ford Capri 1700 GT automatic – Workshop Service & Repair Manual

Rust is a common concern for vintage vehicles. Here’s how to manage and prevent it:

1. Inspect the Bodywork: Thoroughly examine areas prone to rust, such as wheel arches, sills, and floor pans.
2. Remove Rust: Use a wire brush or sandpaper to remove loose rust. For more severe cases, use a rust remover solution.
3. Treat with Rust Converter: Apply a rust converter to neutralize any remaining rust and prevent further corrosion.
4. Protect with Primer and Paint: Repaint the treated areas with rust-inhibiting primer and paint to provide long-lasting protection.

Our manual provides step-by-step instructions on rust treatment and prevention. Download your manual here for detailed guidance.

Electrical issues can be complex. Follow these steps to diagnose and fix them:

1. Inspect Wiring: Check for damaged or frayed wires. Repair or replace any problematic wiring.
2. Test Switches and Fuses: Ensure that all switches and fuses are working correctly. Replace any faulty components.
3. Check Gauges: Malfunctioning gauges may be due to faulty sensors or wiring. Verify and repair connections as needed.
4. Use Wiring Diagrams: Refer to the manual’s wiring diagrams for accurate troubleshooting and repairs.

For detailed solutions and wiring diagrams, access our comprehensive manual.

Worn suspension components can affect your car's handling and ride. Here’s how to address them:

1. Inspect Bushings: Check for cracks or wear in the suspension bushings. Replace them if they are deteriorated.
2. Examine Ball Joints: Look for any play or damage in the ball joints. Replace if necessary.
3. Check Shock Absorbers: Test for leaks or reduced performance in shock absorbers. Replace worn-out shocks.
4. Perform Regular Maintenance: Regularly inspect and maintain suspension components to prevent issues.

Our manual provides in-depth guidance on suspension maintenance and repairs. Get it here for complete instructions.

Transmission issues can be problematic. Here’s a step-by-step approach:

1. Check Fluid Levels: Ensure the transmission fluid is at the correct level. Top off if needed.
2. Look for Leaks: Inspect for transmission fluid leaks. Repair any leaks you find.
3. Replace the Transmission Filter: A clogged filter can affect performance. Replace the filter as per the manual's instructions.
4. Adjust Transmission Bands: If your transmission is slipping, follow the manual’s guidance to adjust the bands properly.

For comprehensive transmission maintenance and repair steps, download our manual.

To prevent overheating, follow these steps to maintain your cooling system:

1. Check Coolant Levels: Regularly monitor and maintain the proper coolant level in the radiator.
2. Inspect Radiator and Hoses: Look for leaks or blockages in the radiator and hoses. Clean or replace as needed.
3. Examine the Water Pump: Ensure the water pump is functioning correctly. Replace if it’s failing.
4. Monitor the Thermostat: A malfunctioning thermostat can cause overheating. Replace it if it’s not working correctly.

Our manual offers detailed procedures for cooling system maintenance and repair. Get your copy here for thorough instructions.