1977 Ford Capri II 2000 Ghia – Workshop Service & Repair Manual

1. Check the Battery: Ensure the battery is fully charged and has a strong voltage. Replace if it’s weak.
2. Inspect Spark Plugs: Worn or dirty spark plugs can cause starting difficulties. Clean or replace them as needed.
3. Examine the Ignition System: Check the distributor cap, ignition coil, and ignition leads for signs of wear or damage. Replace faulty components.
4. Adjust the Choke: Ensure the carburettor choke is functioning correctly and adjust it for cold weather starting.

Our workshop manual provides detailed instructions on diagnosing and resolving cold-starting issues, ensuring your Capri II starts reliably every time.

1. Clean the Carburettor: Remove the carburettor and clean it thoroughly with carburettor cleaner to eliminate dirt and deposits.
2. Adjust the Fuel Mixture: Use the mixture screws to achieve the correct fuel-air ratio for smooth running.
3. Inspect the Float Level: Ensure the float is set correctly to prevent flooding or fuel starvation.

Our manual offers step-by-step guidance on carburettor maintenance and adjustments, helping you restore your Capri II’s performance.

1. Identify the Leak Source: Common areas include the valve cover gasket, oil pan gasket, and crankshaft seals. Inspect these areas for leaks.
2. Replace Gaskets and Seals: If you find a leak, replace the affected gasket or seal. Ensure the surfaces are clean before installation.
3. Check Oil Pressure: High oil pressure can exacerbate leaks. Verify that your oil pressure is within the recommended range.

Our workshop manual provides detailed procedures for identifying and repairing oil leaks, helping you maintain a leak-free engine.

1. Check the Fuses: Start by inspecting the fuse box and replacing any blown fuses.
2. Inspect Wiring: Look for signs of frayed, corroded, or damaged wires. Repair or replace any faulty wiring.
3. Test the Charging System: Use a multimeter to test the alternator and battery. Replace any components that are not performing correctly.

Our manual includes comprehensive wiring diagrams and troubleshooting tips to help you resolve any electrical issues efficiently.

1. Inspect for Rust: Check common rust-prone areas like wheel arches, door sills, and the underbody.
2. Remove Rust: Sand down the affected areas to remove rust. Use a rust converter to treat any remaining rust.
3. Apply Primer and Paint: After rust removal, apply a rust-inhibiting primer and repaint the area to protect it from future corrosion.

Our workshop manual provides tips on rust prevention and repair, helping you maintain the bodywork of your Capri II in pristine condition.