1978 Ford Capri 1.3 GL – Workshop Service & Repair Manual

1. Inspect the Car: Check common rust spots like sills, door jambs, and floors.
2. Clean the Area: Remove any loose rust using a wire brush or sandpaper.
3. Apply Rust Converter: Use a rust converter to neutralize any remaining rust.
4. Prime and Paint: Apply a primer and then paint to protect the area from further rusting.
5. Regular Maintenance: Wash and wax your car regularly to prevent rust formation.

Our manuals provide detailed procedures and tips for managing rust problems effectively. Check them out to ensure you cover all necessary steps.

1. Check the Battery: Ensure the battery terminals are clean and connections are tight.
2. Inspect Fuses: Replace any blown fuses in the fuse box.
3. Test Wiring: Look for damaged or loose wires and repair as needed.
4. Check Alternator: Ensure the alternator is functioning correctly and charging the battery.
5. Consult a Professional: If the problem persists, seek help from a qualified electrician.

Our manuals include troubleshooting tips and wiring diagrams to help resolve electrical issues.

1. Check Fuel Lines: Inspect for leaks or cracks and replace any damaged lines.
2. Clean Fuel Filter: Replace or clean the fuel filter to ensure proper fuel flow.
3. Inspect Fuel Pump: Ensure the fuel pump is working correctly and delivering adequate fuel pressure.
4. Examine Carburetor: Clean the carburetor and adjust the fuel mixture if necessary.
5. Test Fuel Injectors: If applicable, check and clean fuel injectors.

Our manuals offer comprehensive guides on fuel system maintenance and repair.

1. Inspect Suspension Components: Check shock absorbers, struts, and bushings for wear.
2. Replace Worn Parts: Replace any worn or damaged suspension parts.
3. Check Alignment: Ensure the wheel alignment is correct to prevent uneven wear.
4. Test Ride Quality: Evaluate the vehicle’s ride quality and handling.
5. Routine Inspections: Regularly inspect suspension components as part of routine maintenance.

Our manuals provide detailed instructions on inspecting and repairing suspension components.

1. Check Coolant Level: Ensure the coolant level is adequate and top up if necessary.
2. Inspect Radiator: Check for blockages or leaks in the radiator and hoses.
3. Examine Thermostat: Replace a faulty thermostat that may be causing overheating.
4. Test Water Pump: Ensure the water pump is functioning properly.
5. Check for Leaks: Look for leaks in the cooling system and repair as needed.

Our manuals include troubleshooting tips and maintenance schedules to help prevent and resolve overheating issues.