1978 Ford Capri 2.0 V6 S automatic – Workshop Service & Repair Manual

1. Inspect the Car: Examine common rust-prone areas like the undercarriage, wheel arches, and door sills.
2. Clean the Area: Remove any loose rust with a wire brush or sandpaper.
3. Apply Rust Converter: Use a rust converter to neutralize remaining rust.
4. Prime and Paint: Apply a primer followed by a rust-resistant paint.
5. Protect: Consider using undercoating to protect against future rust.

For detailed instructions and prevention tips, our manual provides comprehensive steps to keep your vehicle rust-free.

1. Check Fuses: Inspect and replace any blown fuses in the fuse box.
2. Test Electrical Connections: Ensure all wiring and connections are secure and free of corrosion.
3. Inspect the Battery: Check the battery’s charge and condition; clean terminals if needed.
4. Examine Grounds: Ensure all grounding points are clean and secure.
5. Use a Multimeter: Test circuits for voltage and continuity to locate faults.

Our manual includes detailed wiring diagrams and troubleshooting tips to resolve electrical issues effectively.

1. Inspect Fuel Filter: Replace the fuel filter if clogged.
2. Check Fuel Pump: Ensure the fuel pump is operating correctly by listening for its sound and checking pressure.
3. Examine Fuel Lines: Look for leaks or blockages in the fuel lines.
4. Clean Carburetor: If your model has a carburetor, clean it thoroughly.
5. Check Fuel Injectors: For fuel injection systems, ensure injectors are clean and functioning.

Our manual provides step-by-step instructions for diagnosing and repairing fuel system issues.

1. Check Fluid Levels: Ensure the transmission fluid is at the correct level and in good condition.
2. Inspect for Leaks: Look for any leaks around the transmission.
3. Examine Transmission Filter: Replace the transmission filter if it’s dirty or clogged.
4. Test Shifting: Check for smooth and accurate shifting; adjust if necessary.
5. Consult a Mechanic: If problems persist, seek professional advice.

Our manual includes detailed procedures for diagnosing and repairing transmission issues to ensure smooth operation.

1. Check Power Steering Fluid: Ensure fluid levels are adequate and top up if needed.
2. Inspect Steering Components: Look for wear in the steering rack, tie rods, and other components.
3. Check for Leaks: Inspect for leaks in the power steering system.
4. Examine Alignment: Ensure wheel alignment is correct and adjust as necessary.
5. Test Steering Response: Check for smooth and responsive steering; address any unusual noises.

Our manual provides detailed guidance on diagnosing and repairing steering problems to maintain safe and precise handling.