1978 Ford Capri 2.3 V6 S – Workshop Service & Repair Manual

1. Inspect: Examine the vehicle's body, undercarriage, and wheel arches for visible rust spots.
2. Clean: Remove loose rust using a wire brush or sandpaper.
3. Treat: Apply a rust remover or converter to affected areas.
4. Prime and Paint: Use a rust-inhibiting primer followed by matching paint.
5. Protect: Apply a rust-proof coating or underseal to prevent future rust.

For detailed rust repair techniques and preventative measures, our manual offers comprehensive guidance.

1. Check Fuses: Inspect and replace any blown fuses.
2. Inspect Wiring: Look for damaged or corroded wiring connections.
3. Test Components: Use a multimeter to test electrical components like switches and relays.
4. Clean Contacts: Ensure all electrical contacts are clean and secure.
5. Repair or Replace: Fix or replace faulty components as needed.

Our manual provides in-depth troubleshooting tips for electrical issues and component diagnostics.

1. Inspect Fuel Lines: Look for leaks or damage in fuel lines and connections.
2. Clean Fuel Filter: Replace or clean the fuel filter if clogged.
3. Check Fuel Pump: Test the fuel pump for proper operation and pressure.
4. Examine Carburetor: Clean or rebuild the carburetor if necessary.
5. Address Leaks: Fix any leaks in the fuel system immediately.

Our manual covers detailed procedures for maintaining and repairing the fuel system components.

1. Inspect Components: Check the suspension system for worn or damaged parts, such as bushings, ball joints, and shocks.
2. Test Handling: Drive the vehicle to assess handling and ride quality.
3. Replace Worn Parts: Replace any worn or damaged suspension components.
4. Align: Ensure proper wheel alignment after repairs.
5. Lubricate: Apply lubricant to suspension joints if needed.

For a step-by-step guide on suspension maintenance and repairs, refer to our detailed manual.

1. Check Coolant Level: Ensure the coolant level is adequate and top up if necessary.
2. Inspect Radiator: Look for blockages or leaks in the radiator and coolant hoses.
3. Test Thermostat: Replace a faulty thermostat if the engine isn’t reaching the proper temperature.
4. Flush System: Perform a coolant system flush to remove any debris.
5. Check Water Pump: Ensure the water pump is functioning correctly.

For detailed procedures on diagnosing and fixing engine overheating, consult our comprehensive manual.