1978 Ford Capri 3.0 Ghia automatic – Workshop Service & Repair Manual

1. Identify Rust Areas: Inspect the vehicle thoroughly, focusing on common rust spots like the wheel arches, underbody, and around the windows.
2. Clean the Area: Remove any loose rust with a wire brush or sandpaper.
3. Apply Rust Converter: Use a rust converter to neutralize the remaining rust.
4. Prime and Paint: Apply a rust-inhibiting primer, followed by touch-up paint to protect the area from future corrosion.
5. Regular Inspection: Check for new rust regularly and address any issues promptly.

For detailed instructions and diagrams, refer to our comprehensive manual for the 1978 Ford Capri 3.0 Ghia Automatic.

1. Check Fuses: Inspect the fuse box and replace any blown fuses.
2. Inspect Wiring: Look for frayed or damaged wires and repair or replace as needed.
3. Test Components: Use a multimeter to check the voltage of critical components like the battery, alternator, and starter motor.
4. Clean Connections: Ensure all electrical connections are clean and secure.
5. Consult Wiring Diagrams: Refer to the manual's wiring diagrams for troubleshooting specific electrical issues.

Our manual provides detailed electrical diagrams and troubleshooting steps for the 1978 Ford Capri 3.0 Ghia Automatic.

1. Check Fuel Filter: Replace the fuel filter if it's clogged or dirty.
2. Inspect Fuel Lines: Look for leaks or damage in the fuel lines and replace as necessary.
3. Clean Fuel Injectors: Use a fuel injector cleaner to remove deposits.
4. Test Fuel Pump: Ensure the fuel pump is delivering the correct pressure.
5. Examine the Carburetor: If equipped, clean and adjust the carburetor according to the manual's specifications.

For detailed fuel system maintenance procedures, consult our in-depth manual for the 1978 Ford Capri 3.0 Ghia Automatic.

1. Inspect Suspension Components: Check for worn-out or damaged parts like shocks, struts, and bushings.
2. Replace Worn Parts: Replace any components that show signs of wear or damage.
3. Check Alignment: Have the wheel alignment checked and adjusted if necessary.
4. Examine Bushings: Replace any cracked or worn bushings to maintain proper suspension function.
5. Test Drive: After repairs, test drive to ensure the suspension is functioning smoothly.

Our manual includes detailed suspension maintenance and repair procedures for the 1978 Ford Capri 3.0 Ghia Automatic.

1. Check Coolant Level: Ensure the coolant level is adequate and top up if necessary.
2. Inspect Radiator and Hoses: Look for leaks or blockages in the radiator and hoses.
3. Test Thermostat: Replace the thermostat if it is not functioning properly.
4. Flush Radiator: Perform a radiator flush to remove any debris or sludge.
5. Check Water Pump: Ensure the water pump is operating correctly and replace it if it's failing.

For more detailed engine maintenance and overheating troubleshooting, refer to our comprehensive manual for the 1978 Ford Capri 3.0 Ghia Automatic.