1978 Ford Capri II 1300 L – Workshop Service & Repair Manual

1. Inspect the Rust: Check for rust spots and assess the extent of the damage. Look for rust on fenders and rockers by carefully examining these areas.
2. Remove Rust: Use a wire brush or sandpaper to remove loose rust. For heavy rust, consider using a rust remover or converter.
3. Clean the Area: Thoroughly clean the area to remove any dust or debris.
4. Apply Primer: Apply a rust-inhibiting primer to the cleaned surface.
5. Paint and Seal: Once the primer is dry, paint the area with a matching color and seal it with a clear coat.

For detailed instructions and tips, consult our workshop manual.

1. Check Fuses: Inspect the fuse box for any blown fuses and replace them as needed.
2. Inspect Wiring: Examine the wiring for visible damage or loose connections.
3. Test Electrical Components: Use a multimeter to check the voltage and continuity of various electrical components.
4. Repair or Replace: Repair any damaged wiring or replace faulty electrical components.

Our manual provides detailed diagrams and troubleshooting tips for electrical issues.

1. Inspect the Carburetor: Check for any signs of wear or damage.
2. Clean the Carburetor: Remove the carburetor and clean it with a carburetor cleaner.
3. Adjust the Settings: Ensure the idle and mixture settings are correctly adjusted.
4. Reassemble and Test: Reassemble the carburetor and test the vehicle for proper operation.

Our manual includes detailed procedures for carburetor maintenance and adjustment.

1. Locate the Leak: Inspect the transmission for signs of leakage and identify the source.
2. Check Seals and Gaskets: Examine seals and gaskets for wear or damage and replace them if necessary.
3. Tighten Bolts: Ensure that all transmission bolts are properly tightened.
4. Refill Transmission Fluid: After repairs, refill the transmission fluid to the appropriate level.

Detailed instructions for fixing transmission leaks are available in our manual.

1. Check Coolant Levels: Ensure the coolant is at the correct level. Add coolant if necessary.
2. Inspect Hoses: Look for any leaks or damage in the hoses and replace if needed.
3. Examine the Radiator: Check the radiator for blockages or leaks.
4. Test the Thermostat: Ensure the thermostat is functioning properly and replace it if it’s stuck open or closed.

For more detailed cooling system maintenance, refer to our comprehensive manual.