1978 Ford Capri II 1600 GL – Workshop Service & Repair Manual

1. Inspect the vehicle regularly for any signs of rust, focusing on the wheel arches, door sills, and undercarriage.
2. Clean and sand the affected areas to remove rust down to the bare metal.
3. Apply a rust converter to neutralize any remaining rust.
4. Prime and paint the area to protect it from future corrosion.

Our Workshop Service & Repair Manual offers detailed instructions on rust prevention and repair, helping you keep your Capri in excellent condition.

1. Check the battery for proper voltage and clean the terminals to ensure a good connection.
2. Inspect fuses and replace any that are blown.
3. Examine the wiring for frays or breaks, particularly in areas prone to wear.
4. Test the alternator and starter motor for proper function.

For a complete guide on diagnosing and repairing electrical issues, refer to our Workshop Service & Repair Manual, which provides clear, step-by-step instructions.

1. Inspect the carburetor for any clogs or buildup of dirt and debris.
2. Clean the carburetor thoroughly with a carburetor cleaner, paying attention to all small parts.
3. Adjust the fuel mixture to achieve the proper air-fuel ratio.
4. Replace worn-out gaskets and seals to prevent air leaks.

Our manual includes a detailed section on carburetor maintenance and adjustments, guiding you through every step of the process.

1. Inspect the shock absorbers for leaks or damage and replace them if necessary.
2. Check the bushings for signs of wear and tear, and replace any that are cracked or deteriorated.
3. Ensure the springs are in good condition, and replace them if they are sagging or damaged.
4. Lubricate suspension components regularly to reduce friction and wear.

The Workshop Service & Repair Manual provides detailed instructions on diagnosing and repairing suspension issues, helping you restore your vehicle's smooth ride.

1. Inspect brake pads for wear and replace them if they are thin.
2. Examine brake discs for warping or damage and replace them if needed.
3. Bleed the brake lines to remove any air that might cause a spongy brake pedal.
4. Check brake fluid levels and top off with the correct type if necessary.

Our manual provides step-by-step procedures for maintaining and repairing the brake system, ensuring your Ford Capri’s safety and performance.