1978 Ford Capri II 2000 S automatic – Workshop Service & Repair Manual

1. Inspect the Rust Areas: Check for rust spots on the body and undercarriage.
2. Clean the Affected Areas: Use a wire brush to remove loose rust.
3. Apply Rust Converter: Treat the area with a rust converter to neutralize the rust.
4. Prime and Paint: Apply primer and paint to protect against future rust.
5. Seal: Use a rust-proof sealant to ensure long-term protection.

Our manual provides detailed instructions and diagrams for addressing rust issues effectively.

1. Check Fuses: Inspect and replace any blown fuses in the fuse box.
2. Examine Wiring: Look for damaged or loose wires in the electrical system.
3. Test Battery and Alternator: Ensure the battery and alternator are functioning correctly.
4. Inspect Electrical Components: Check switches and relays for proper operation.
5. Consult Wiring Diagrams: Use the manual’s wiring diagrams to troubleshoot complex electrical issues.

Refer to our manual for step-by-step guidance on diagnosing and fixing electrical problems.

1. Check for Leaks: Inspect the carburetor for fuel leaks.
2. Clean the Carburetor: Remove and clean the carburetor using a carburetor cleaner.
3. Adjust the Mixture: Adjust the air-fuel mixture according to the specifications.
4. Inspect the Gaskets: Replace any worn gaskets to prevent air leaks.
5. Test Performance: Ensure the engine runs smoothly after adjustments.

Our manual offers detailed procedures for carburetor maintenance and troubleshooting.

1. Inspect Suspension Components: Check for worn-out shocks, struts, and bushings.
2. Replace Damaged Parts: Replace any worn or damaged suspension components.
3. Check Alignment: Ensure the vehicle’s alignment is within manufacturer specifications.
4. Test Drive: Assess the vehicle's handling and ride quality after repairs.
5. Maintain Regularly: Follow a routine maintenance schedule to prevent future wear.

Consult our manual for comprehensive instructions on inspecting and repairing suspension issues.

1. Identify Leak Source: Check the radiator, hoses, and connections for leaks.
2. Tighten Connections: Tighten any loose hose clamps or fittings.
3. Replace Faulty Components: Replace damaged hoses, clamps, or the radiator as needed.
4. Flush the System: Flush the cooling system and refill with fresh coolant.
5. Test the System: Run the engine and check for leaks to ensure the problem is resolved.

Our manual includes detailed steps and troubleshooting tips for resolving cooling system leaks.