1978 Ford Capri II 2000 (V6) Ghia – Workshop Service & Repair Manual

1. Inspect: Regularly check for rust spots, especially in common areas like wheel arches and the undercarriage.
2. Clean: Remove loose rust using a wire brush or sandpaper.
3. Treat: Apply a rust converter or primer to the affected areas.
4. Protect: Use anti-rust paint or undercoating to prevent future rust.

Our manual provides detailed steps and illustrations to guide you through the rust treatment process effectively.

1. Check Fuses: Inspect and replace any blown fuses.
2. Inspect Wiring: Look for damaged or frayed wires.
3. Test Components: Use a multimeter to test battery voltage and alternator output.
4. Repair Connections: Ensure all electrical connections are clean and secure.

Our manual offers detailed wiring diagrams and troubleshooting steps to help you diagnose and fix electrical problems.

1. Clean: Remove and clean the carburetor with a carburetor cleaner.
2. Adjust: Check and adjust the idle and mixture settings.
3. Inspect: Replace any worn gaskets or seals.
4. Rebuild: If problems persist, consider a carburetor rebuild or replacement.

Our manual includes a step-by-step guide to carburetor maintenance and repair, ensuring your vehicle runs smoothly.

1. Inspect: Check for worn bushings, shocks, and struts.
2. Replace Parts: Replace any worn or damaged suspension components.
3. Align: Perform a wheel alignment to ensure proper handling.
4. Maintain: Regularly check and maintain suspension components to prevent further wear.

Our manual provides comprehensive details on suspension inspection and replacement procedures.

1. Check Fluid: Ensure brake fluid levels are adequate and top up if necessary.
2. Inspect Pads and Rotors: Check for wear and replace brake pads or rotors as needed.
3. Bleed Brakes: Remove any air from the brake lines.
4. Test: Ensure the brake system operates correctly after repairs.

Our manual provides detailed instructions on brake system maintenance and troubleshooting to keep your vehicle safe.