1979 Ford Capri 1.3 GL – Workshop Service & Repair Manual

1. Inspect for Rust: Regularly check common rust-prone areas such as wheel arches, the undercarriage, and around the door frames.
2. Clean and Remove Rust: Use a wire brush or sandpaper to remove rust. Apply a rust remover or rust-inhibiting primer.
3. Apply Rust-Resistant Paint: After removing rust, apply a primer followed by a rust-resistant paint to prevent future corrosion.
4. Regular Maintenance: Regularly wash and wax the vehicle to protect the paint and prevent rust formation.

Our detailed manuals provide step-by-step instructions for rust removal and prevention, ensuring your Capri remains in top condition.

1. Check Fuses: Inspect and replace any blown fuses in the fuse box.
2. Inspect Wiring: Examine the wiring for any visible damage or loose connections.
3. Test Battery and Alternator: Use a multimeter to check the battery voltage and alternator output.
4. Repair or Replace Faulty Components: Address or replace faulty components such as the ignition coil or alternator as needed.

Our manuals include comprehensive electrical diagrams and troubleshooting tips to help you diagnose and fix electrical issues efficiently.

1. Check Fuel Filter: Replace the fuel filter if it is clogged or dirty.
2. Inspect Fuel Lines: Examine fuel lines for leaks or damage and replace them if necessary.
3. Clean Carburetor: Remove and clean the carburetor to ensure proper fuel mixture.
4. Test Fuel Pump: Ensure the fuel pump is functioning correctly and replace it if it is not delivering adequate pressure.

Our manuals offer detailed procedures for cleaning, inspecting, and replacing fuel system components, ensuring smooth engine performance.

1. Check Coolant Levels: Ensure that the coolant reservoir is filled to the correct level.
2. Inspect Radiator: Check for leaks or blockages in the radiator and clean or replace if necessary.
3. Test Thermostat: Ensure the thermostat is functioning properly; replace it if it is stuck in the closed position.
4. Check for Coolant Leaks: Inspect the water pump and hoses for leaks and replace any damaged components.

Our manuals provide troubleshooting guidelines and step-by-step procedures to address overheating issues, helping you maintain optimal engine temperature.

1. Inspect Brake Pads: Check the thickness of the brake pads and replace them if they are worn out.
2. Check Brake Fluid: Ensure brake fluid levels are adequate and top up if necessary.
3. Examine Brake Lines: Inspect brake lines for leaks or damage and replace if needed.
4. Bleed Brakes: If the brake pedal feels spongy, bleed the brakes to remove air from the system.

Our manuals provide detailed instructions on brake maintenance, including pad replacement, fluid checks, and line inspections, ensuring your braking system functions correctly.