1979 Ford Capri 1.6 S automatic – Workshop Service & Repair Manual

1. Inspect the Rust: Regularly check body panels and the undercarriage for signs of rust. Look for bubbling paint or visible rust spots.
2. Clean and Sand: Use a wire brush or sandpaper to remove loose rust. Clean the area thoroughly to remove dust and debris.
3. Apply Rust Converter: Treat the area with a rust converter to stop further rusting.
4. Prime and Paint: Apply a rust-inhibiting primer followed by matching automotive paint to protect the area.

Our manual provides detailed instructions and illustrations for handling rust issues effectively. Explore our guide to get expert advice on preventing and repairing rust.

1. Check Fuses and Bulbs: Inspect and replace any blown fuses or burnt-out bulbs.
2. Inspect Wiring: Look for damaged or loose wires. Repair or replace as needed.
3. Test Connections: Use a multimeter to ensure proper voltage at various connections.
4. Clean Connectors: Clean electrical connectors to improve conductivity and reduce issues.

Get step-by-step troubleshooting tips and repair solutions in our manual to tackle electrical issues effectively.

1. Inspect the Carburetor: Check for clogged jets or filters. Clean the carburetor with a carburetor cleaner.
2. Adjust the Mixture: Ensure the air-fuel mixture is correctly adjusted. Refer to the manual for specific settings.
3. Check Fuel Lines: Inspect fuel lines for leaks or blockages and replace any damaged sections.
4. Replace Filters: Change the fuel filter if it appears clogged.

Our manual offers in-depth guidance on carburetor maintenance and fuel system repairs to help you restore optimal performance.

1. Check for Leaks: Inspect the radiator, hoses, and connections for leaks. Replace damaged components.
2. Top Up Coolant: Ensure the coolant level is adequate. Use the recommended type of coolant.
3. Inspect the Thermostat: Replace a faulty thermostat that may cause overheating.
4. Flush the System: Perform a coolant flush to remove debris and contaminants.

Find detailed repair instructions for cooling system issues in our manual to keep your engine running cool.

1. Inspect Suspension Components: Check for worn-out bushings, shocks, or struts. Replace any worn parts.
2. Check Alignment: Ensure the wheel alignment is correct. Adjust as needed to improve handling.
3. Replace Components: Install new suspension components if wear is severe.
4. Test Drive: Evaluate the vehicle’s handling and ride comfort after repairs.

Our manual provides comprehensive maintenance and repair information for suspension issues to help you restore your vehicle’s handling and performance.