1979 Ford Capri 2.0 L automatic – Workshop Service & Repair Manual

1. Inspect Regularly: Check body panels and undercarriage for rust spots.
2. Clean Affected Areas: Remove loose rust with a wire brush or grinder.
3. Apply Rust Converter: Treat the rusted areas with a rust converter.
4. Prime and Paint: Apply a primer, followed by matching paint, to protect against further rust.
5. Prevent Future Rust: Regularly wash the undercarriage and apply rust-proofing treatments.

Our workshop manuals provide detailed steps for rust repair and prevention. Explore our resources for comprehensive guidance.

1. Check Fuses: Inspect and replace any blown fuses in the fuse box.
2. Inspect Wiring: Look for damaged or corroded wires, and repair or replace them as needed.
3. Test Components: Use a multimeter to test switches and connectors.
4. Clean Contacts: Ensure all electrical connections are clean and secure.
5. Consult Wiring Diagrams: Refer to wiring diagrams in the manual for troubleshooting.

Our manuals include wiring diagrams and troubleshooting tips for electrical issues. Access detailed information in our workshop guides.

1. Inspect Carburetor: Check for clogged jets or dirty components.
2. Clean Thoroughly: Disassemble and clean the carburetor using a carburetor cleaner.
3. Adjust Settings: Ensure proper adjustment of idle and mixture screws.
4. Check Fuel Lines: Inspect fuel lines for leaks or blockages.
5. Replace Fuel Filter: Replace the fuel filter to ensure clean fuel supply.

Our manuals offer in-depth procedures for carburetor cleaning and adjustment. Discover step-by-step instructions in our service guides.

1. Inspect Hoses: Check radiator and heater hoses for leaks or cracks.
2. Check Radiator: Look for leaks or damage in the radiator.
3. Test Thermostat: Ensure the thermostat opens and closes correctly.
4. Flush System: Flush the cooling system and refill with fresh coolant.
5. Inspect Water Pump: Check for leaks around the water pump and replace if necessary.

Our manuals provide detailed maintenance procedures for the cooling system. Access comprehensive guides to resolve overheating issues effectively.

1. Inspect Components: Check shock absorbers, struts, and bushings for wear.
2. Replace Worn Parts: Replace any worn or damaged suspension components.
3. Check Alignment: Ensure wheel alignment is within specifications.
4. Test Handling: Drive and test handling; adjust as needed.
5. Regular Maintenance: Perform regular checks and maintenance on the suspension system.

Our manuals include detailed suspension repair and maintenance procedures. Find the solutions you need in our comprehensive workshop guides.