1979 Ford Capri 2.0 V6 Ghia – Workshop Service & Repair Manual

1. Inspect the affected areas: Regularly check for signs of rust or corrosion.
2. Clean the area: Remove loose rust with a wire brush or grinder.
3. Apply rust converter: Use a rust converter to neutralize any remaining rust.
4. Prime and paint: Apply a rust-inhibiting primer and then paint the area to prevent further rusting.
5. Regular maintenance: Wash the undercarriage frequently to remove road salt and debris.

For detailed instructions, our manuals provide step-by-step guidance on treating and preventing rust issues.

1. Check the fuse box: Inspect and replace any blown fuses.
2. Test wiring connections: Ensure all wiring connections are secure and free of corrosion.
3. Inspect bulbs: Replace any faulty bulbs or damaged sockets.
4. Use a multimeter: Test for voltage at various points in the circuit to identify issues.
5. Consult wiring diagrams: Refer to the manual's wiring diagrams for troubleshooting complex electrical problems.

Our manuals include detailed electrical schematics and troubleshooting tips to help you efficiently solve wiring issues.

1. Inspect the carburetor: Check for dirt or debris and clean it if necessary.
2. Adjust fuel mixture: Ensure the air-fuel mixture is correctly adjusted.
3. Replace fuel filters: Replace clogged fuel filters to improve fuel flow.
4. Check fuel lines: Inspect and replace any damaged or leaking fuel lines.
5. Test fuel pump: Ensure the fuel pump is delivering adequate pressure.

Our manuals provide detailed maintenance procedures and adjustments to keep your carburetor and fuel system running smoothly.

1. Check coolant levels: Ensure the coolant level is sufficient and top up as needed.
2. Inspect for leaks: Look for leaks in the radiator, hoses, and connections.
3. Replace faulty components: Replace any damaged hoses or a faulty radiator cap.
4. Flush the cooling system: Perform a coolant flush to remove debris and sediment.
5. Check the thermostat: Ensure the thermostat is functioning properly.

Our manuals offer comprehensive troubleshooting for cooling system issues and overheating problems.

1. Check the clutch fluid: Ensure the clutch fluid is at the proper level and in good condition.
2. Inspect the clutch pedal: Look for issues with the pedal's movement and adjust if necessary.
3. Examine gearbox fluid: Check and replace the gearbox fluid as needed.
4. Listen for noises: Pay attention to unusual noises from the gearbox, which may indicate internal issues.
5. Consult the manual: Use the manual's guidelines for detailed gearbox and clutch repairs.

Our manuals provide in-depth repair procedures and maintenance tips to address gearbox and clutch issues effectively.