1979 Ford Capri 2.0 V6 GL automatic – Workshop Service & Repair Manual

1. Inspect all body panels and undercarriage for visible rust.
2. Clean the affected areas using a wire brush and sandpaper to remove loose rust.
3. Apply a rust converter to neutralize any remaining rust.
4. Use a rust-resistant primer and paint to protect the areas from future corrosion.
5. Consider applying undercoating to the undercarriage for additional protection.

For detailed instructions and preventive maintenance tips, our manual provides step-by-step guidance on rust repair and protection.

1. Check all fuses and replace any that are blown.
2. Inspect wiring for signs of wear or damage and repair or replace faulty wires.
3. Clean and tighten all electrical connections and terminals.
4. Test the battery and alternator to ensure they are functioning properly.
5. Consult the manual for wiring diagrams and troubleshooting tips to address specific electrical issues.

Our comprehensive manual includes detailed electrical schematics and troubleshooting steps to help you resolve wiring and lighting problems efficiently.

1. Clean the carburetor thoroughly to remove dirt and debris.
2. Adjust the idle mixture and speed screws as per the manufacturer’s specifications.
3. Inspect the fuel lines for leaks and replace any damaged sections.
4. Check the fuel filter and replace it if clogged.
5. Ensure the fuel pump is functioning correctly and delivering adequate pressure.

The manual provides in-depth instructions for carburetor cleaning and adjustments, along with fuel system maintenance tips.

1. Inspect the radiator and hoses for leaks and replace any damaged components.
2. Check the radiator cap and thermostat for proper operation and replace if faulty.
3. Ensure the coolant level is adequate and use the correct coolant mixture.
4. Bleed the cooling system to remove air pockets that may cause overheating.
5. Monitor the temperature gauge and address any issues immediately to avoid engine damage.

Our repair manual offers detailed procedures for diagnosing and fixing cooling system issues, including step-by-step guides for system bleeding and component replacement.

1. Inspect the suspension components for signs of wear, including shocks, struts, and bushings.
2. Replace any worn or damaged parts, such as ball joints, control arms, and tie rods.
3. Perform a wheel alignment to ensure proper handling and tire wear.
4. Check and adjust the suspension settings as needed for optimal performance.
5. Regularly inspect and maintain suspension components to prevent future issues.

For a comprehensive guide on suspension maintenance and repairs, refer to our manual, which includes detailed instructions and maintenance schedules.