1979 Ford Capri 2.0 V6 S – Workshop Service & Repair Manual

1. Inspect the affected areas to assess the extent of the rust damage.
2. Clean the rusted areas thoroughly with a wire brush or sandpaper to remove loose rust.
3. Apply a rust converter to the cleaned areas to neutralize the rust.
4. Prime the area with a rust-inhibiting primer.
5. Paint over the primer with matching automotive paint to protect the area.

For detailed instructions and diagrams on rust repair, our comprehensive workshop manual for the 1979 Ford Capri 2.0 V6 S is available for purchase.

1. Check the fuse box for any blown fuses and replace them if necessary.
2. Inspect all wiring connections for signs of wear or corrosion.
3. Use a multimeter to test the voltage and continuity of the wiring circuits.
4. Repair or replace any damaged wiring and connectors.
5. Verify that all electrical components are functioning correctly after repairs.

Our workshop manual provides detailed wiring diagrams and troubleshooting steps for electrical issues. Get your copy today to ensure proper repairs.

1. Check for fuel leaks around the carburetor and fuel lines.
2. Clean the carburetor jets and passages to remove any blockages.
3. Adjust the carburetor settings according to the manufacturer’s specifications.
4. Replace the fuel filter if it's clogged.
5. Test the vehicle to ensure smooth acceleration and idle.

For in-depth carburetor adjustments and fueling system maintenance, refer to our detailed workshop manual available on our website.

1. Inspect the radiator, hoses, and water pump for leaks.
2. Tighten any loose hose clamps and replace any damaged hoses.
3. Check the coolant level and top it up if necessary.
4. Flush the cooling system and refill it with the appropriate coolant mixture.
5. Test the thermostat and replace it if it's faulty.

Our manual offers step-by-step guidance on cooling system maintenance and repairs. Purchase it now for comprehensive solutions to overheating issues.

1. Inspect the suspension components, including shocks, struts, and bushings.
2. Replace worn or damaged parts such as bushings and ball joints.
3. Check and adjust the alignment to ensure proper handling.
4. Test drive the vehicle to assess the effectiveness of the repairs.
5. Regularly maintain and inspect the suspension system to prevent future issues.

For detailed procedures and maintenance tips on suspension components, our workshop manual for the 1979 Ford Capri 2.0 V6 S provides all the information you need.