1979 Ford Capri 3.0 Ghia automatic – Workshop Service & Repair Manual

1. Inspect the Affected Areas: Check for visible rust on body panels and undercarriage. Pay attention to areas prone to moisture and road salt accumulation.
2. Clean the Surface: Remove loose rust and debris using a wire brush or sandpaper. Clean the area thoroughly to ensure no contaminants remain.
3. Apply Rust Converter: Use a rust converter to neutralize rust and prevent further corrosion. Follow the product instructions for application.
4. Prime and Paint: Apply a rust-inhibiting primer and then paint over the area. Ensure the paint matches your car’s color and is suitable for metal surfaces.
5. Regular Maintenance: Regularly inspect and clean the undercarriage and body panels to prevent future rusting.

Our manuals provide detailed instructions and tips on rust prevention and repair techniques specific to the 1979 Ford Capri 3.0 Ghia Automatic.

1. Check Fuses: Inspect and replace any blown fuses in the fuse box. Ensure you use the correct fuse rating.
2. Examine Wiring Connections: Look for loose or damaged wiring connections. Secure or replace any faulty wires.
3. Test Components: Use a multimeter to test electrical components, including lights, switches, and relays, to ensure they function correctly.
4. Inspect Grounds: Check for corroded or loose ground connections, which can cause electrical issues.
5. Consult Wiring Diagrams: Refer to the wiring diagrams in our manual to trace and diagnose complex electrical faults.

Our manuals offer comprehensive electrical schematics and troubleshooting tips to resolve wiring and lighting issues efficiently.

1. Clean the Carburetor: Remove and clean the carburetor to ensure proper fuel flow. Use a carburetor cleaner to remove any debris or varnish.
2. Check Fuel Filters: Replace the fuel filters to prevent clogging and ensure clean fuel delivery.
3. Adjust Idle and Mixture Settings: Refer to the manual for the correct idle speed and fuel mixture settings, and adjust them accordingly.
4. Inspect Fuel Lines: Look for any leaks or damage in the fuel lines and replace them if necessary.
5. Test for Proper Operation: After reassembly, start the engine and check for smooth operation and proper throttle response.

Our manuals provide step-by-step procedures for carburetor cleaning, adjustment, and troubleshooting, ensuring your engine runs smoothly.

1. Inspect for Leaks: Check the radiator, hoses, and water pump for leaks. Replace any damaged or leaking components.
2. Check Coolant Levels: Ensure the coolant level is within the recommended range and top up if necessary.
3. Flush the Cooling System: Perform a coolant flush to remove any blockages or debris that might be affecting cooling efficiency.
4. Test the Thermostat: Verify that the thermostat opens and closes at the correct temperatures. Replace it if it’s faulty.
5. Check Radiator Cap: Ensure the radiator cap maintains proper pressure to prevent coolant boiling over.

Our manuals include detailed instructions on diagnosing and repairing cooling system issues, helping you keep your engine at the right temperature.

1. Inspect Suspension Components: Check for worn or damaged suspension parts, including shock absorbers, struts, and bushings.
2. Replace Worn Parts: Replace any components that show signs of wear or damage to restore proper handling and ride quality.
3. Align the Wheels: Perform a wheel alignment to correct any issues with tire wear and handling.
4. Check Tire Condition: Ensure your tires are properly inflated and have adequate tread. Replace any tires that are worn out.
5. Test Drive: After repairs, test drive the vehicle to ensure that handling and ride comfort have improved.

Our manuals offer comprehensive guidance on suspension maintenance and repairs, helping you achieve optimal driving performance.