1980 Ford Capri 1.3 L – Workshop Service & Repair Manual

1. Inspect all body panels and undercarriage for visible rust.
2. Sand the rusted areas to remove flaky and loose rust.
3. Apply a rust-inhibiting primer to the affected areas.
4. Fill any pitted areas with body filler.
5. Repaint the area with a matching automotive paint.
6. Regularly apply rust-proofing products to prevent future rust.

For comprehensive repair instructions, refer to our manual for detailed rust treatment procedures.

1. Check all fuses and replace any that are blown.
2. Inspect wiring for signs of wear or damage and repair as needed.
3. Test all electrical components to identify faulty parts.
4. Replace malfunctioning bulbs and connectors.
5. Clean and tighten all electrical connections.
6. Use a multimeter to diagnose persistent electrical issues.

Our manual includes detailed wiring diagrams and troubleshooting tips for electrical issues.

1. Inspect the carburetor for leaks or damage.
2. Clean the carburetor thoroughly, including the jets and passages.
3. Check and replace the fuel filter if clogged.
4. Adjust the carburetor settings according to the manufacturer’s specifications.
5. Ensure proper fuel pump operation and fuel line integrity.
6. Test drive to confirm proper engine performance after adjustments.

Our manual provides step-by-step carburetor cleaning and adjustment procedures.

1. Inspect all hoses and connections for leaks and replace any damaged components.
2. Check the radiator for cracks or leaks and repair or replace if necessary.
3. Ensure the radiator cap is functioning correctly.
4. Flush and refill the cooling system with the appropriate coolant mixture.
5. Verify that the thermostat is operating correctly and replace it if needed.
6. Test the water pump and replace it if it shows signs of failure.

Our manual includes a detailed guide on cooling system maintenance and repairs.

1. Inspect suspension components, including shocks, struts, and bushings, for wear and damage.
2. Replace worn or damaged parts as needed.
3. Check and adjust the alignment of the wheels.
4. Ensure proper tire inflation and balance.
5. Test drive to confirm improvements in handling and ride quality.
6. Regularly inspect the suspension to prevent future issues.

For detailed suspension repair and maintenance instructions, consult our comprehensive manual.