1980 Ford Capri 1.6 L automatic – Workshop Service & Repair Manual

1. Check Transmission Fluid Level: Ensure the fluid is at the correct level; add if necessary.
2. Inspect Transmission Fluid Condition: If the fluid is dirty or burnt, replace it.
3. Examine the Transmission Filter: Replace the filter if clogged or dirty.
4. Check for Leaks: Look for any leaks around the transmission and repair them.
5. Test the Transmission Bands: Adjust or replace bands if they are worn.

Our manual provides detailed procedures for diagnosing and fixing transmission issues, ensuring smooth operation of your vehicle.

1. Replace the Air Filter: A clogged air filter can reduce engine performance.
2. Check the Throttle Cable: Ensure it is properly adjusted and free of damage.
3. Inspect Fuel Injectors: Clean or replace them if they are clogged.
4. Examine the Fuel Filter: Replace if it is dirty or clogged.
5. Check Engine Timing: Adjust if necessary to optimize performance.

Our manual includes comprehensive instructions on addressing poor acceleration to improve your vehicle's responsiveness.

1. Inspect the Fuel System: Ensure fuel pump, filter, and lines are in good condition.
2. Check the Ignition System: Examine spark plugs, ignition wires, and distributor for wear.
3. Adjust Idle Speed: Set to manufacturer specifications.
4. Examine the Battery: Ensure it is fully charged and connections are secure.
5. Check for Vacuum Leaks: Repair any leaks in the vacuum lines.

Our manual offers detailed troubleshooting steps to resolve engine stalling issues effectively.

1. Check Coolant Levels: Add coolant if levels are low.
2. Inspect the Radiator: Ensure it is clean and not clogged.
3. Replace the Thermostat: If it is stuck closed, replace it to allow proper coolant flow.
4. Examine the Water Pump: Ensure it is functioning and not leaking.
5. Check Radiator Fan: Verify that it operates correctly; repair or replace if necessary.

Our manual provides detailed guidance on diagnosing and fixing overheating issues to maintain optimal engine temperature.

1. Identify Leak Source: Check gaskets, seals, and oil pan for leaks.
2. Replace Faulty Seals: Replace any damaged or worn-out seals.
3. Tighten Loose Bolts: Secure any loose bolts and connections.
4. Inspect the Oil Filter: Replace if it is leaking.
5. Clean the Engine: Remove residual oil to pinpoint the source of the leak more accurately.

Our manual includes effective methods for locating and fixing oil leaks to keep your engine running smoothly.