1980 Ford Capri 1.6 S – Workshop Service & Repair Manual

1. Check Fuel System: Inspect the fuel pump, filter, and lines for clogs or leaks.
2. Examine Ignition System: Ensure spark plugs, wires, and the distributor are in good condition.
3. Adjust Idle Speed: Set the idle speed to manufacturer specifications.
4. Inspect the Battery: Confirm that the battery is charged and connections are secure.
5. Check for Vacuum Leaks: Repair any leaks in the vacuum lines.

Our manual provides detailed instructions on troubleshooting and fixing engine stalling issues effectively.

1. Replace Air Filter: A dirty air filter can restrict airflow and affect acceleration.
2. Check Throttle Cable: Ensure it is properly adjusted and functioning smoothly.
3. Inspect Fuel Injectors: Clean or replace them if they are clogged.
4. Examine Fuel Filter: Replace it if it is dirty or clogged.
5. Check Engine Timing: Adjust the timing to improve performance.

Our manual includes comprehensive steps to address poor acceleration and restore optimal engine performance.

1. Check Coolant Levels: Refill coolant if levels are low.
2. Inspect Radiator: Ensure the radiator is clean and free of obstructions.
3. Replace Thermostat: If stuck closed, replace it to allow proper coolant flow.
4. Examine Water Pump: Verify that it is functioning properly and not leaking.
5. Check Radiator Fan: Ensure the fan is operational; repair or replace if necessary.

Our manual offers detailed guidance on diagnosing and fixing overheating problems to keep your engine at a safe temperature.

1. Identify Leak Source: Check gaskets, seals, and the oil pan for leaks.
2. Replace Faulty Seals: Replace any damaged or worn seals.
3. Tighten Loose Bolts: Secure any loose bolts and connections.
4. Inspect Oil Filter: Replace if it is leaking.
5. Clean Engine: Remove residual oil to accurately locate the source of the leak.

Our manual includes effective methods for locating and repairing oil leaks to ensure a clean and efficient engine.

1. Check Fuses: Inspect and replace any blown fuses.
2. Examine Wiring: Look for damaged or frayed wires and repair as needed.
3. Test Battery: Ensure the battery is fully charged and connections are clean.
4. Inspect Alternator: Verify that the alternator is functioning correctly and charging the battery.
5. Check Ground Connections: Ensure all ground connections are secure and free of corrosion.

Our manual provides detailed instructions on diagnosing and repairing electrical faults to keep your vehicle’s systems running smoothly.