1986 Ford Escort 1.1 GL – Workshop Service & Repair Manual

1. Check Battery Connections: Ensure the battery terminals are clean and tight.
2. Inspect Fuses: Replace any blown fuses with the correct amperage rating.
3. Examine Wiring: Look for frayed or damaged wires, and repair or replace as needed.
4. Test Components: Use a multimeter to check the voltage at key components like the alternator and starter.

Our manual provides detailed wiring diagrams and step-by-step troubleshooting tips to help you diagnose and resolve electrical problems effectively.

1. Clean the Affected Area: Remove loose rust using a wire brush and sandpaper.
2. Apply Rust Converter: Treat the area with a rust converter to stop further corrosion.
3. Prime and Paint: Apply a rust-inhibiting primer followed by paint to protect the metal.
4. Regular Inspections: Check regularly for new rust spots and address them promptly.

Our manual includes guidance on rust prevention and repair techniques to keep your Escort looking and performing its best.

1. Check Fuel Flow: Ensure that fuel is reaching the carburetor without obstruction.
2. Inspect Carburetor Settings: Adjust the idle mixture and speed screws according to the manual’s specifications.
3. Clean the Carburetor: Remove and clean the carburetor, paying special attention to jets and passages.
4. Look for Leaks: Examine the carburetor for any signs of leaks and replace any damaged gaskets.

The manual offers detailed instructions on carburetor maintenance and adjustment, helping you restore smooth engine operation.

1. Inspect Components: Check for worn-out shock absorbers, struts, and bushings.
2. Replace Damaged Parts: Replace any components that show significant wear or damage.
3. Check Alignment: Ensure that the vehicle's alignment is correct to prevent uneven tire wear.
4. Perform Regular Maintenance: Regularly inspect and maintain suspension components to extend their lifespan.

Our manual provides comprehensive maintenance schedules and repair procedures to keep your suspension in top condition.

1. Verify Power Supply: Check if the fuel pump is receiving power by testing the electrical connections.
2. Listen for Operation: Turn the ignition on and listen for the fuel pump’s operating sound.
3. Replace the Fuel Pump: If the pump is not functioning, replace it with a new unit.
4. Check Fuel Lines: Inspect and clean the fuel lines to ensure proper fuel flow.

Our manual includes troubleshooting steps and detailed instructions for fuel pump replacement, ensuring you can address fuel delivery issues effectively.