1. Check Air Filter: Inspect and replace the air filter if it's dirty or clogged.
2. Inspect Fuel System: Ensure the fuel filter is clean and the fuel pump is working correctly.
3. Examine Spark Plugs: Check the spark plugs for wear and replace them if necessary.
4. Inspect Engine Sensors: Verify the function of the throttle position sensor and mass airflow sensor. Replace if faulty.
5. Consult the Manual: Follow the manual’s detailed procedures for diagnosing and addressing engine issues.

Our manual provides step-by-step instructions for resolving engine stalling and rough idle problems.

1. Check Fuses: Inspect the fuse box for any blown fuses and replace them as needed.
2. Test Battery: Ensure the battery is charged and in good condition. Replace if necessary.
3. Inspect Wiring: Look for loose or damaged wiring connections and repair or reconnect.
4. Examine Alternator: Verify that the alternator is properly charging the battery. Replace if defective.
5. Refer to the Manual: Use the manual’s electrical system diagrams for troubleshooting and repair.

Our manual offers detailed troubleshooting steps for addressing electrical system failures effectively.

1. Check Transmission Fluid: Ensure the transmission fluid is at the correct level and in good condition. Top up or replace if needed.
2. Inspect Transmission Lines: Look for leaks or damage in the transmission lines and repair or replace as necessary.
3. Examine CVT Fluid: Check the CVT fluid for contamination or degradation and replace if required.
4. Test Transmission Components: Verify the function of transmission components, including belts and pulleys.
5. Consult the Manual: Follow the manual’s detailed CVT troubleshooting procedures.

Our manual provides comprehensive guidance for diagnosing and fixing transmission slippage and shifting issues.

1. Inspect Brake Pads: Check the brake pads for wear and replace them if necessary.
2. Examine Rotors: Look for warping or scoring on the brake rotors and resurface or replace them as needed.
3. Check Brake Fluid: Ensure the brake fluid is at the proper level and is clean. Replace if contaminated.
4. Inspect Calipers: Verify that brake calipers are functioning correctly and aligned properly.
5. Refer to the Manual: Use the manual for brake system maintenance and repair instructions.

Our manual includes detailed procedures for diagnosing and resolving brake noise and vibration issues.

1. Check HVAC Controls: Ensure the controls are set correctly and functioning.
2. Inspect Fuses: Look for any blown fuses related to the HVAC system and replace them.
3. Examine AC Compressor: Verify that the AC compressor is engaging properly. Replace if faulty.
4. Check Heater Core: Inspect the heater core for leaks or blockages and repair or replace as necessary.
5. Consult the Manual: Follow the manual’s HVAC system troubleshooting procedures for detailed guidance.

Our manual offers thorough instructions for diagnosing and fixing issues with the AC and heater systems.