• Check Transmission Fluid: Ensure the transmission fluid is at the proper level. Low fluid can cause shifting issues. Refill or replace the fluid if necessary.
• Inspect for Leaks: Look for any signs of transmission fluid leaks under the vehicle. Address leaks by tightening connections or replacing damaged seals.
• Check for Error Codes: Use a diagnostic scanner to check for any error codes related to the transmission. Follow the diagnostic steps to resolve any identified issues.

Consult Transmission Manual: For detailed repair or replacement steps, refer to the specific transmission section in the service manual for step-by-step instructions.

• Inspect Fuses and Relays: Start by checking the fuses and relays in the fuse box. Replace any that are blown or malfunctioning.
• Check Battery Connections: Ensure the battery terminals are clean and securely connected. Corroded terminals can cause electrical issues.
• Examine Wiring: Inspect the wiring harnesses for any signs of damage or loose connections. Repair or replace damaged wires as needed.
• Consult Electrical System Manual: Refer to the electrical system section of the service manual for detailed diagnostics and repair procedures.

• Inspect Brake Pads and Rotors: Check the brake pads and rotors for wear. Replace them if they are worn beyond the recommended thickness.
• Check Brake Fluid: Ensure the brake fluid is at the correct level and is free of contaminants. Top up or replace the brake fluid if necessary.
• Test Brake System: Perform a brake system test to ensure proper operation. Look for any unusual noises or vibrations and address them as outlined in the manual.

Follow Brake System Manual: Use the brake system section of the manual for detailed instructions on brake maintenance and repair.

• Check Fuel Supply: Ensure there is adequate fuel in the tank. Inspect the fuel filter and fuel pump for any issues that could cause a lack of fuel delivery.
• Inspect Ignition System: Check the spark plugs and ignition coils for proper operation. Replace any faulty components.
• Examine Air Intake: Ensure the air filter is clean and the air intake system is functioning properly.

Refer to Engine Troubleshooting Manual: Follow the engine troubleshooting steps in the manual for a comprehensive guide to diagnosing and fixing stalling issues.

• Check A/C Refrigerant Level: Verify the refrigerant level in the A/C system. Refill or replace the refrigerant if it's low.
• Inspect A/C Components: Examine the A/C compressor, condenser, and evaporator for any signs of damage or leaks. Repair or replace faulty components.
• Test A/C System: Run the A/C system and listen for unusual noises. Ensure the system is cooling effectively.

Consult A/C System Manual: For detailed repair instructions and diagnostics, refer to the A/C system section of the service manual.