Check the engine oil and coolant levels, topping them up if they're low and ensuring they're at the recommended levels.

The radiator and hoses should be checked for leaks or damage and repaired or replaced if necessary.

Test the thermostat for proper operation, replacing it if it's stuck, closed, or open.

Make sure there are no visible signs of oil leaks from the engine, such as around the valve cover gasket or oil pan, and repair them as needed.

The manual recommends that you refer to the engine troubleshooting section in the manual for guidance on diagnosing and resolving engine problems.

Check the transmission fluid level and condition, topping it up or replacing it if it's dirty or low.

Inspect the transmission for leaks, such as around the seals or gaskets, and repair them as needed.

Test the transmission solenoids and sensors for proper operation, replacing any faulty components.

If the transmission continues to have issues, consult a professional mechanic for diagnosis and repair.

Recommendation: Refer to the manual transmission maintenance section to inspect and troubleshoot transmission issues. Inspecting and troubleshooting transmission problems.

Inspect the front suspension components for damage or wear, such as worn bushings or ball joints, and replace them as needed.

Ensure that the power steering fluid is at the proper level and condition, topping it up or replacing it if it's low or contaminated.

Test the power steering pump and steering rack for proper operation, repairing or replacing any faulty components.

Suggestion: The manual's suspension and steering system maintenance section provides guidance on inspecting and troubleshooting suspension and steering issues.

Verify the battery's connections for corrosion or looseness, tightening or cleaning them as needed.

Test the battery and alternator for proper voltage output, replacing them if they're faulty.

Inspect the starter and fix or replace it if necessary.

The manual suggests: Refer to the electrical section for guidance on inspecting and troubleshooting electrical system problems.

Check the HVAC system for any visible damage or leaks, and replace or repair any components as needed.

Test the thermostat and blend door actuators to ensure proper operation, and repair them if faulty.

Inspect the refrigerant level and recharge it if it's low, ensuring it's at the recommended level.

Manual suggestion: The HVAC maintenance section guides inspecting and troubleshooting HVAC problems.

Check the seat belt buckles and retractors for proper operation, and repair or replace them if faulty.

Test the airbag sensors and wiring for proper connection and operation, repairing or replacing any damaged components.

Inspect the airbag control module for fault codes, resetting it if necessary or replacing it if it's faulty.

Suggestion from the manual: Refer to the seat belts and airbag system maintenance chapter for information on inspecting and troubleshooting seat belts and airbag issues.