2007 Ford Focus C-Max 1.6 TDCi (90) LX – Workshop Service & Repair Manual

1. Check Battery Voltage: Use a multimeter to measure the battery voltage. It should be around 12.6 volts with the engine off and 13.7-14.7 volts with the engine running.
2. Inspect the Alternator: Look for any signs of physical damage or wear. Check the drive belt for proper tension and condition.
3. Test Alternator Output: Use an alternator tester to measure output while the engine is running. It should be within the specified range.
4. Replace Faulty Parts: If the alternator is not generating sufficient power, replace it with a new one.

Our manual provides detailed instructions and diagrams to guide you through these steps.

1. Check Tire Pressure: Ensure that all tires are inflated to the recommended pressure.
2. Inspect Alignment: Have a professional check and align the wheel alignment if necessary.
3. Examine Suspension Components: Look for worn-out or damaged suspension parts, such as bushings or shocks.
4. Rotate Tires Regularly: Follow the recommended tire rotation schedule to ensure even wear.

Our manual includes maintenance schedules and troubleshooting tips to help you manage tire wear effectively.

1. Check Suspension: Inspect shock absorbers and struts for wear or leakage. Replace any faulty components.
2. Examine the Underbody: Look for loose or damaged parts under the vehicle, including heat shields and exhaust components.
3. Inspect Wheel Bearings: Listen for unusual noises when driving and check for play in the wheel bearings.
4. Tighten Bolts and Nuts: Ensure all suspension and underbody bolts are securely fastened.

Our manual provides guidance on diagnosing and fixing suspension issues to eliminate rattles and wobbles.

1. Check Fuses: Inspect and replace any blown fuses in the fuse box.
2. Test Electrical Components: Use a multimeter to check the voltage and continuity of various electrical components.
3. Inspect Wiring: Look for damaged or frayed wires, and repair or replace them as needed.
4. Verify Battery Condition: Ensure the battery terminals are clean and securely connected.

The manual offers detailed electrical diagrams and troubleshooting steps to help resolve electrical issues.

1. Check Engine Codes: Use an OBD-II scanner to read diagnostic trouble codes and identify the issue.
2. Inspect Engine Fluids: Ensure that oil, coolant, and other fluids are at proper levels and in good condition.
3. Examine Engine Components: Look for signs of wear or damage in components such as the timing belt, spark plugs, and fuel injectors.
4. Perform Regular Maintenance: Follow the maintenance schedule for oil changes, filter replacements, and other routine tasks.

Our manual provides comprehensive engine repair and maintenance instructions to keep your engine running smoothly.