2007 Ford Focus C-Max 2.0 16V Ghia – Workshop Service & Repair Manual

1. Check Battery Voltage: Use a multimeter to measure the battery voltage. A healthy battery should read around 12.6 volts.
2. Inspect Alternator Output: Start the engine and measure the voltage again. It should rise to 13.8–14.2 volts if the alternator is functioning correctly.
3. Check for Warning Lights: Look for a battery or alternator warning light on the dashboard.
4. Examine Connections: Ensure all wiring and connections to the alternator are secure and free of corrosion.
5. Replace the Alternator: If the voltage is insufficient and connections are fine, you may need to replace the alternator.

Our manual provides detailed instructions and diagrams for testing and replacing the alternator, ensuring you can handle this issue efficiently.

1. Check Alignment: Misalignment can cause uneven tire wear. Have your vehicle’s alignment checked and corrected by a professional.
2. Inspect Tire Pressure: Ensure tires are inflated to the recommended pressure levels. Under or over-inflation can lead to premature wear.
3. Examine Suspension: Worn-out suspension components can affect tire wear. Inspect shock absorbers and struts for damage.
4. Rotate Tires: Regularly rotate your tires to promote even wear. Follow the pattern and intervals suggested in your manual.

Our manual includes tire maintenance and alignment checks to help you manage and prevent excessive tire wear.

1. Inspect Suspension Components: Check for worn or damaged suspension parts such as struts, shock absorbers, and bushings.
2. Examine Wheel Bearings: Worn wheel bearings can cause rattles and wobbling. Check for play or noise when the wheel is spun.
3. Check Underbody: Look for loose or damaged components under the vehicle that may be causing noise.
4. Tighten Loose Bolts: Ensure all bolts and fasteners in the suspension and underbody are properly tightened.

The manual offers detailed guidance on inspecting and repairing suspension components to eliminate rattles and wobbling.

1. Check Fuses: Inspect the fuse box for blown fuses and replace them as needed.
2. Test Electrical Components: Use a multimeter to check the voltage and continuity of electrical components.
3. Inspect Wiring: Look for damaged or frayed wiring that may cause shorts or disconnections.
4. Examine Battery Connections: Ensure battery terminals are clean and tightly connected.

Our manual includes comprehensive electrical troubleshooting procedures and diagrams to help you identify and resolve electrical issues.

1. Check Engine Oil: Ensure the engine oil is at the proper level and replace it if it’s dirty or low.
2. Inspect for Leaks: Look for oil or coolant leaks under the engine.
3. Listen for Unusual Sounds: Listen for knocking or tapping noises, which may indicate internal engine issues.
4. Run Diagnostics: Use an OBD-II scanner to check for any error codes that may indicate specific engine problems.

Our manual provides detailed troubleshooting steps and repair instructions for engine issues, helping you diagnose and fix problems effectively.