1. Monitor Oil Levels Regularly: Keep a close eye on oil levels and top up as necessary.
2. Inspect for Leaks: Check for oil leaks around the engine and under the car.
3. Replace Worn Seals and Rings: If leaks are found, replace worn piston rings or valve seals.
4. Use the Correct Oil Grade: Ensure you're using the recommended oil grade to prevent excessive consumption.

Our Workshop Service & Repair Manual offers step-by-step instructions on how to inspect, diagnose, and replace components to manage oil consumption effectively.

1. Check Coolant Levels: Make sure the coolant is at the correct level and is the right type for your engine.
2. Inspect the Thermostat: A faulty thermostat can cause overheating. Test it and replace it if needed.
3. Examine the Radiator: Ensure the radiator is not clogged or damaged, which can restrict airflow and cause overheating.
4. Check the Water Pump: Verify that the water pump is circulating coolant properly.

Our manual provides detailed procedures for diagnosing and repairing cooling system issues, including thermostat and water pump replacement.

1. Clean the Throttle Body: Remove and clean the throttle body to ensure smooth airflow.
2. Inspect the Idle Air Control Valve (IACV): If the IACV is malfunctioning, it may need to be cleaned or replaced.
3. Test the Mass Airflow Sensor (MAF): Clean or replace the MAF sensor if it's dirty or faulty.
4. Check for Vacuum Leaks: Inspect all vacuum lines for leaks or damage and replace as necessary.

Our manual includes clear, detailed instructions for cleaning, testing, and replacing components to restore a stable idle in your Ford C-Max.

1. Test the Battery: Ensure the battery is fully charged and the terminals are clean and secure.
2. Check the Alternator: Verify that the alternator is working properly to charge the battery.
3. Inspect Fuses and Relays: Look for blown fuses or faulty relays and replace them as needed.
4. Examine Wiring: Check for any damaged or corroded wires and repair or replace them.

Our Workshop Service & Repair Manual provides wiring diagrams and step-by-step instructions to help you identify and resolve electrical problems with ease.

1. Check Tire Pressure: Ensure all tires are inflated to the recommended pressure.
2. Inspect Suspension Components: Look for worn or damaged suspension parts like bushings, ball joints, and tie rods.
3. Get a Wheel Alignment: Have a professional perform a wheel alignment to correct any misalignment.
4. Rotate Tires: Rotate your tires regularly to ensure even wear.

Our manual provides detailed guidance on inspecting, maintaining, and replacing suspension components and performing wheel alignments to prevent uneven tire wear.