2009 Ford C-Max 2.0 TDCi (136) Zetec – Workshop Service & Repair Manual

1. Identify the Problem: Check for a loss of power, excessive smoke, or unusual noises.
2. Inspect the Turbocharger: Look for signs of damage, such as oil leaks or worn bearings.
3. Check the Oil Level: Ensure there is adequate oil and that it’s not contaminated.
4. Clean or Replace Components: Clean the turbocharger and associated pipes. Replace any damaged parts.
5. Consult a Professional: If the issue persists, seek assistance from a certified mechanic.

How Our Manuals Can Help: Our comprehensive workshop manuals provide detailed instructions for diagnosing and repairing turbocharger issues. Access our guides for step-by-step solutions and maintenance tips.

1. Check Oil Level and Quality: Verify that the oil level is correct and the oil is clean.
2. Flush the Engine: Use an engine flush to remove sludge build-up.
3. Replace Oil and Filter: After flushing, replace the oil and filter with high-quality products.
4. Inspect the Oil Pump: Ensure the oil pump is functioning correctly.
5. Regular Maintenance: Schedule regular oil changes to prevent sludge build-up.

How Our Manuals Can Help: Our repair manuals include detailed procedures for engine flushing and oil maintenance. Follow our guidelines to keep your engine running smoothly.

1. Diagnose the DPF Issue: Use a diagnostic tool to check for DPF-related error codes.
2. Perform a Regeneration: Follow the manual’s instructions for initiating a forced regeneration.
3. Check for Blockages: Inspect and clean the DPF if necessary.
4. Replace the DPF: If cleaning doesn’t resolve the issue, consider replacing the DPF.
5. Monitor Performance: Keep an eye on the DPF performance to ensure it’s functioning properly.

How Our Manuals Can Help: Our detailed manuals guide you through the diagnosis, regeneration, and replacement processes for the DPF, ensuring you address issues effectively.

1. Check for Error Codes: Use a diagnostic scanner to identify the cause of limp-home mode.
2. Inspect Key Components: Check the turbocharger, fuel system, and sensors.
3. Clear the Codes: Reset the error codes using the scanner.
4. Test Drive: Test the vehicle to see if the issue persists.
5. Seek Professional Help: If the problem continues, consult a mechanic for further diagnosis.

How Our Manuals Can Help: Our manuals provide comprehensive troubleshooting steps for limp-home mode issues, helping you resolve the problem efficiently.

1. Check Alignment: Ensure the wheels are properly aligned.
2. Inspect Suspension Components: Look for worn or damaged suspension parts.
3. Verify Tyre Pressure: Maintain correct tyre pressure as specified in the manual.
4. Rotate Tyres Regularly: Rotate tyres according to the manufacturer’s recommendations.
5. Replace Worn Tyres: If tyres are excessively worn, replace them with new ones.

How Our Manuals Can Help: Our workshop manuals include detailed instructions for tyre maintenance and alignment checks, helping you extend the life of your tyres.